Boom Winch, Hook Winch and Winch Frame - Install
`
587R Pipelayer Machine Systems
[RENR8212]
587R Pipelayer Machine Systems
Boom Winch, Hook Winch and Winch Frame - Remove
587R Pipelayer Machine Systems
Boom - Remove and Install
WORK TOOLS
WINCH GP
587R Pipelayer Machine Systems
Boom Winch Motor - Disassemble
587R Pipelayer Machine Systems
Boom Winch Motor - Assemble
587R Pipelayer Machine Systems
Hook Winch Motor - Disassemble
587R Pipelayer Machine Systems
Hook Winch Motor - Assemble
587R Pipelayer Machine Systems
Boom Winch - Disassemble
587R Pipelayer Machine Systems
Boom Winch - Assemble
587R Pipelayer Machine Systems
Hook Winch - Disassemble
1.1. Installation Procedure
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 189-0410     | Shackle As     | 2     |
1U-9204 | Lever Puller Hoist     | 1     | |
138-7574 | Link Bracket     | 1     |
- Attach Tooling (A) and a suitable lifting device onto boom winch, hook winch and winch frame (23). The weight of boom winch, hook winch and winch frame (23) is approximately 2767 kg (6100 lb). Position winch (23) .
Show/hide table
![]() | |
Illustration 1 | g01364730 |
- Install bolts (24) in order to secure winch (23).
Show/hide table
![]() | |
Illustration 2 | g01364731 |
- Connect hose assemblies (22), (21), and (20) .
Show/hide table
![]() | |
Illustration 3 | g01364727 |
- Connect hose assemblies (19), (18), (17), and (16) .
Show/hide table
![]() | |
Illustration 4 | g01364726 |
- Connect hose assemblies (15), (14), and (13) .
Show/hide table
![]() | |
Illustration 5 | g01364724 |
- Position filter base (12). Install bolts (11) .
Show/hide table
![]() | |
Illustration 6 | g01364722 |
- Connect hose assemblies (10), (9), and (8) .
Show/hide table
![]() | |
Illustration 7 | g01364721 |
- Connect hose assemblies (7), (6), and (5) .
Show/hide table
![]() | |
Illustration 8 | g01364720 |
- Position accumulator (4).
Show/hide table
![]() | |
Illustration 9 | g01392914 |
- Connect hydraulic hose assemblies (3) .
Show/hide table
![]() | |
Illustration 10 | g01392889 |
- Install covers (2) and (1) .
Show/hide table
![]() | |
Illustration 11 | g01364696 |
- Fill the hydraulic tank with oil. Refer to Operation and Maintenance Manual, "Hydraulic Oil - Change".
- Raise the counterweight frame.
End By:
- Install the lower load sheave block. Refer to Disassembly and Assembly, "Lower Sheave Block - Remove and Install".
- Install the lower boom sheave block. Refer to Disassembly and Assembly, "Lower Boom Sheave Block - Remove and Install".
Information System:
587R Pipelayer Machine Systems
Boom Winch, Hook Winch and Winch Frame - Remove
AP655D and BG655D Asphalt Pavers Propel System
Hydraulic Schematic (Propel System) - Steel Track Machine
C4.4 and C6.6 Engines for Caterpillar Built Machines
Diagnostic Code Cross Reference
C4.4 and C6.6 Engines for Caterpillar Built Machines
Low Power/Poor or No Response to Throttle
2007/08/06
Radiator and Hydraulic Oil Coolers Have Been Improved {1351}
C15 and C18 Generator Set Engines
Radiator Bottom Tank - Remove and Install - Charge Air
2007/07/02
New Routing of Wiring Harness for Pressure Sensor {1408, 5057, 6543}
C15 and C18 Generator Set Engines
Radiator Top Tank - Remove and Install - Charge Air
AP655D and BG655D Asphalt Pavers Propel System
Piston Motor (Propel) - Steel Track Machine
160M and 160 Motor Grader Machine Systems
Bank Valve - Remove - Rear Frame
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train
Idler Axle - Disassemble
AP600D, AP655D, BG600D and BG655D Asphalt Pavers
MID 157 - CID 0967 - FMI 02
The Fitting on the Air Cleaner Group is Installed Incorrectly on Specific Off-Highway Trucks{1051}
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Disassemble
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Assemble
Reworking the Pressure Sensor for the Saw Pump{1408, 5057, 6543}
3412E Engine for Caterpillar Built Machines
Coolant Flow - Test
587R Pipelayer Machine Systems
Boom - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Cooling Fan Control - Test
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Tilt)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Lift)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Auxiliary)
R1600G Load Haul Dump Remote Control System
General Information
R1600G Load Haul Dump Remote Control System
Control Valve (Steering and Bucket)