Piston Pump (Propel) - Disassemble
`
CB14 Paving Compactor Machine Systems
[KENR6008]
CB14 Paving Compactor Machine Systems
Final Drive Planetary (Drum Propel) - Install
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Assemble
HYDRAULIC SYSTEM
PUMP GP
CB14 Paving Compactor Machine Systems
Gear Pump (Steering and Vibratory) - Remove
CB14 Paving Compactor Machine Systems
Gear Pump (Steering and Vibratory) - Disassemble
CB14 Paving Compactor Machine Systems
Gear Pump (Steering and Vibratory) - Assemble
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Remove
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Install
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Disassemble
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Assemble
1.1. Disassembly Procedure
Disassembly Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1P-1861 | Retaining Ring Pliers | 1 |
| B | 1P-1863 | Retaining Ring Pliers | 1 |
| C | 314-9716 | Barrel Compressor | 1 |
| D | FT-3019 | Retaining Ring Remover | 1 |
| 1P-1858 | Retaining Ring Pliers | 1 | |
Start By:
- Remove the piston pump (propel). Refer to Disassembly and Assembly, "Piston Pump (Propel) - Remove".
- Remove nut (2), coil (1), and the O-ring seal.
Show/hide table
 | |
| Illustration 1 | g01434009 |
- Remove cartridge assembly (3) .
Show/hide table
 | |
| Illustration 2 | g01434010 |
- Remove seal kit (4) from cartridge assembly (3) .
Show/hide table
 | |
| Illustration 3 | g01434012 |
- Remove the bolts and head (5) .
Show/hide table
 | |
| Illustration 4 | g01393215 |
- Remove O-ring seal (6) .
Show/hide table
 | |
| Illustration 5 | g01393216 |
- Remove gerotor assembly (7) .
Show/hide table
 | |
| Illustration 6 | g01393256 |
- Remove bolts (8) and cover (9) .
Show/hide table
 | |
| Illustration 7 | g01113856 |
- Use Tooling (A) in order to remove retaining ring (10) .
Show/hide table
 | |
| Illustration 8 | g01113857 |
- Remove cover (11) .
- Remove seal (12) from cover (11) .
Show/hide table
 | |
| Illustration 9 | g01113858 |
- Remove O-ring seal (13) and shaft (14) .
Show/hide table
 | |
| Illustration 10 | g01113859 |
- Use Tooling (B) in order to remove retaining ring (15) .
Show/hide table
 | |
| Illustration 11 | g01113861 |
- Remove bearing (16) from shaft (14) .
- Use Tooling (B) in order to remove retaining ring (17) from shaft (14) .
Show/hide table
 | |
| Illustration 12 | g01113862 |
- Remove pin assemblies (18) .
Show/hide table
 | |
| Illustration 13 | g01113867 |
Show/hide table
 |
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
 |
- Install Tooling (C) in order to compress the barrel assembly.
- Remove bearing (20), bearing race (21), and swashplate (19) .
Show/hide table
 | |
| Illustration 14 | g01113868 |
- Remove block (22) and bearing race (23) .
Show/hide table
 | |
| Illustration 15 | g01113869 |
- Remove Tooling (C) .
Show/hide table
 | |
| Illustration 16 | g01113870 |
- Remove barrel assembly (24) .
- Remove pistons (25) and retainer (26) from the barrel assembly.
Show/hide table
 | |
| Illustration 17 | g01113871 |
- Remove pistons (25) from retainer (26) .
Show/hide table
 | |
| Illustration 18 | g01113872 |
- Remove bearing (27) from barrel assembly (24) .
Show/hide table
 | |
| Illustration 19 | g01113873 |
- Remove pins (28) .
Show/hide table
 | |
| Illustration 20 | g01113874 |
- Use Tooling (E), and a suitable press in order to remove retaining ring (29) .
Show/hide table
 | |
| Illustration 21 | g01113876 |
Show/hide table
 | |
| Illustration 22 | g01113879 |
Show/hide table
|
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
|
- Remove washer (32), spring (31), and washer (30) from barrel assembly (24) .
- Remove bolts (32), cover (33), and the O-ring seal.
Show/hide table
 | |
| Illustration 23 | g01114059 |
- Remove bolts (34) and cover (35) .
Show/hide table
 | |
| Illustration 24 | g01114060 |
- Remove nut (38), washer (37), and piston assembly (36) from cover (35) .
Show/hide table
 | |
| Illustration 25 | g01114062 |
- Remove O-ring seal (39) from cover (35) .
Show/hide table
 | |
| Illustration 26 | g01114063 |
- Use Tooling (A) in order to remove retaining ring (40) .
Show/hide table
 | |
| Illustration 27 | g01114065 |
- Remove nuts (43), washer (42), and spring (41) from bolt (44) .
Show/hide table
 | |
| Illustration 28 | g01114067 |
Show/hide table
|
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
|
- Remove nut (45) and the setscrew.
Show/hide table
 | |
| Illustration 29 | g01114069 |
- Remove port plate (46) .
Show/hide table
 | |
| Illustration 30 | g01114070 |
- Remove nut (47) and the setscrew.
Show/hide table
 | |
| Illustration 31 | g01114071 |
- Remove bearing (48) .
Show/hide table
 | |
| Illustration 32 | g01114072 |
Information System:
The Fitting on the Air Cleaner Group is Installed Incorrectly on Specific Off-Highway Trucks{1051}
587R Pipelayer Machine Systems
Boom Winch, Hook Winch and Winch Frame - Install
587R Pipelayer Machine Systems
Boom Winch, Hook Winch and Winch Frame - Remove
AP655D and BG655D Asphalt Pavers Propel System
Hydraulic Schematic (Propel System) - Steel Track Machine
C4.4 and C6.6 Engines for Caterpillar Built Machines
Diagnostic Code Cross Reference
C4.4 and C6.6 Engines for Caterpillar Built Machines
Low Power/Poor or No Response to Throttle
2007/08/06
Radiator and Hydraulic Oil Coolers Have Been Improved {1351}
C15 and C18 Generator Set Engines
Radiator Bottom Tank - Remove and Install - Charge Air
2007/07/02
New Routing of Wiring Harness for Pressure Sensor {1408, 5057, 6543}
C15 and C18 Generator Set Engines
Radiator Top Tank - Remove and Install - Charge Air
AP655D and BG655D Asphalt Pavers Propel System
Piston Motor (Propel) - Steel Track Machine
160M and 160 Motor Grader Machine Systems
Bank Valve - Remove - Rear Frame
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Assemble
Reworking the Pressure Sensor for the Saw Pump{1408, 5057, 6543}
3412E Engine for Caterpillar Built Machines
Coolant Flow - Test
587R Pipelayer Machine Systems
Boom - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Cooling Fan Control - Test
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Tilt)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Lift)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Auxiliary)
R1600G Load Haul Dump Remote Control System
General Information
R1600G Load Haul Dump Remote Control System
Control Valve (Steering and Bucket)
R1600G Load Haul Dump Remote Control System
Machine Preparation for Troubleshooting
3412E Engine for Caterpillar Built Machines
Cooling Fan Speed - Test