Piston Pump (Propel) - Assemble
`
CB14 Paving Compactor Machine Systems
[KENR6008]
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Disassemble
CB14 Paving Compactor Machine Systems
Eccentric Weight Assembly - Remove and Install
HYDRAULIC SYSTEM
PUMP GP
CB14 Paving Compactor Machine Systems
Gear Pump (Steering and Vibratory) - Remove
CB14 Paving Compactor Machine Systems
Gear Pump (Steering and Vibratory) - Disassemble
CB14 Paving Compactor Machine Systems
Gear Pump (Steering and Vibratory) - Assemble
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Remove
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Install
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Disassemble
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Assemble
1.1. Assembly Procedure
Assembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-1861     | Retaining Ring Pliers     | 1     |
B     | 1P-1863     | Retaining Ring Pliers     | 1     |
C     | 314-9716     | Barrel Compressor     | 1     |
D     | FT-3019     | Retaining Ring Remover     | 1     |
1P-1858 | Retaining Ring Pliers     | 1     |
- Use Tooling (F) in order to install bearing (48) .
Show/hide table
![]() | |
Illustration 1 | g01114072 |
- Install the setscrew and nut (47) .
Show/hide table
![]() | |
Illustration 2 | g01114071 |
- Install port plate (46) .
Show/hide table
![]() | |
Illustration 3 | g01114070 |
- Install the setscrew and nut (45) .
Show/hide table
![]() | |
Illustration 4 | g01114069 |
- Install spring (41), washer (42), and nuts (43) onto bolt (44) .
Show/hide table
![]() | |
Illustration 5 | g01114067 |
Show/hide table
![]() |
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
![]() |
- Use Tooling (C) in order to install retaining ring (40) .
Show/hide table
![]() | |
Illustration 6 | g01114065 |
- Install O-ring seal (39) onto cover (35) .
Show/hide table
![]() | |
Illustration 7 | g01114063 |
- Install piston assembly (36), washer (37), and nut (38) onto cover (35) .
Show/hide table
![]() | |
Illustration 8 | g01114062 |
- Install cover (35) and bolts (34) .
Show/hide table
![]() | |
Illustration 9 | g01114060 |
- Install the O-ring seal, cover (33), and bolts (32) .
Show/hide table
![]() | |
Illustration 10 | g01114059 |
- Position washer (30), spring (31), and washer (32) into barrel assembly (24) .
Show/hide table
![]() | |
Illustration 11 | g01113876 |
Show/hide table
![]() | |
Illustration 12 | g01113879 |
Show/hide table
![]() |
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
![]() |
- Use Tooling (D), and a suitable press in order to install retaining ring (29) .
- Install pins (28) .
Show/hide table
![]() | |
Illustration 13 | g01113874 |
- Install bearing (27) onto barrel assembly (24) .
Show/hide table
![]() | |
Illustration 14 | g01113873 |
- Install pistons (25) into retainer (26) .
Show/hide table
![]() | |
Illustration 15 | g01113872 |
- Install pistons (25) and retainer (26) onto the barrel assembly.
Show/hide table
![]() | |
Illustration 16 | g01113871 |
- Position barrel assembly (24) into the housing.
Show/hide table
![]() | |
Illustration 17 | g01113870 |
Show/hide table
![]() |
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
![]() |
- Install Tooling (C) in order to compress the barrel assembly.
- Install block (22) and bearing race (23) .
Show/hide table
![]() | |
Illustration 18 | g01113869 |
- Position one of bearings (20) onto swashplate (19) .
Show/hide table
![]() | |
Illustration 19 | g01114199 |
- Install swashplate (19), bearing race (21), and bearing (20) .
Show/hide table
![]() | |
Illustration 20 | g01113868 |
- Remove Tooling (C) .
Show/hide table
![]() | |
Illustration 21 | g01113867 |
- Install pin assemblies (18) .
- Use Tooling (B) in order to install retaining ring (17) onto shaft (14) .
Show/hide table
![]() | |
Illustration 22 | g01113862 |
- Install bearing (16) onto shaft (14) .
Show/hide table
![]() | |
Illustration 23 | g01113861 |
- Use Tooling (B) in order to install retaining ring (15) .
- Install shaft (14) and O-ring seal (13) .
Show/hide table
![]() | |
Illustration 24 | g01113859 |
- Install seal (12) onto cover (11) .
Show/hide table
![]() | |
Illustration 25 | g01113858 |
- Install cover (11) .
Show/hide table
![]() | |
Illustration 26 | g01113857 |
- Use Tooling (A) in order to install retaining ring (10) .
- Install cover (9) and bolts (8) .
Show/hide table
![]() | |
Illustration 27 | g01113856 |
- Install gerotor assembly (7) .
Show/hide table
![]() | |
Illustration 28 | g01393256 |
- Install O-ring seal (6) .
Show/hide table
![]() | |
Illustration 29 | g01393669 |
- Install head (5) and the bolts.
Show/hide table
![]() | |
Illustration 30 | g01393215 |
- Install seal kit (4) to cartridge assembly (3) .
Show/hide table
![]() | |
Illustration 31 | g01434012 |
- Install cartridge assembly (3) .
Show/hide table
![]() | |
Illustration 32 | g01434010 |
- Install coil assembly (1) and nut (2) .
Show/hide table
![]() | |
Illustration 33 | g01434009 |
End By: Install the piston pump. Refer to Disassembly and Assembly, "Piston Pump (Propel) - Install".
Information System:
CB14 Paving Compactor Machine Systems
Piston Pump (Propel) - Disassemble
The Fitting on the Air Cleaner Group is Installed Incorrectly on Specific Off-Highway Trucks{1051}
587R Pipelayer Machine Systems
Boom Winch, Hook Winch and Winch Frame - Install
587R Pipelayer Machine Systems
Boom Winch, Hook Winch and Winch Frame - Remove
AP655D and BG655D Asphalt Pavers Propel System
Hydraulic Schematic (Propel System) - Steel Track Machine
C4.4 and C6.6 Engines for Caterpillar Built Machines
Diagnostic Code Cross Reference
C4.4 and C6.6 Engines for Caterpillar Built Machines
Low Power/Poor or No Response to Throttle
2007/08/06
Radiator and Hydraulic Oil Coolers Have Been Improved {1351}
C15 and C18 Generator Set Engines
Radiator Bottom Tank - Remove and Install - Charge Air
2007/07/02
New Routing of Wiring Harness for Pressure Sensor {1408, 5057, 6543}
C15 and C18 Generator Set Engines
Radiator Top Tank - Remove and Install - Charge Air
AP655D and BG655D Asphalt Pavers Propel System
Piston Motor (Propel) - Steel Track Machine
Reworking the Pressure Sensor for the Saw Pump{1408, 5057, 6543}
3412E Engine for Caterpillar Built Machines
Coolant Flow - Test
587R Pipelayer Machine Systems
Boom - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Cooling Fan Control - Test
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Tilt)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Lift)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Auxiliary)
R1600G Load Haul Dump Remote Control System
General Information
R1600G Load Haul Dump Remote Control System
Control Valve (Steering and Bucket)
R1600G Load Haul Dump Remote Control System
Machine Preparation for Troubleshooting
3412E Engine for Caterpillar Built Machines
Cooling Fan Speed - Test
587R Pipelayer Machine Systems
Main Control Valve - Remove