Main Control Valve - Install
`
587R Pipelayer Machine Systems
[RENR8212]
587R Pipelayer Machine Systems
Main Control Valve - Remove
587R Pipelayer Machine Systems
Main Control Valve - Disassemble
HYDRAULIC SYSTEM
VALVE GP-CONTROL
1.1. Installation Procedure
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7574 | Link Bracket | 1 |
- Attach Tooling (A) and a suitable lifting device onto main control valve (33). Install main control valve (33). The weight of main control valve (33) is approximately 57 kg (125 lb).
Show/hide table
 | |
| Illustration 1 | g01365107 |
- Connect hose assemblies (27), (28), (29), (30), (31), and (32) .
Show/hide table
 | |
| Illustration 2 | g01393370 |
- Connect hose assemblies (23), (24), (25), and (26) .
Show/hide table
 | |
| Illustration 3 | g01393350 |
- Connect hose assemblies (13), (14), (15), (16), (17), (18), (19), (20), (21), and (22) .
Show/hide table
 | |
| Illustration 4 | g01393342 |
- Connect hose assemblies (7), (8), (9), (10), (11), and (12) .
Show/hide table
 | |
| Illustration 5 | g01393333 |
- Connect harness assemblies (2), (3), (4), (5), and (6) .
Show/hide table
 | |
| Illustration 6 | g01393306 |
- Install plate (1) .
Show/hide table
 | |
| Illustration 7 | g01365033 |
Information System:
587R Pipelayer Machine Systems
Main Control Valve - Remove
3412E Engine for Caterpillar Built Machines
Cooling Fan Speed - Test
R1600G Load Haul Dump Remote Control System
Machine Preparation for Troubleshooting
R1600G Load Haul Dump Remote Control System
Control Valve (Steering and Bucket)
R1600G Load Haul Dump Remote Control System
General Information
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Auxiliary)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Lift)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Control Valve (Tilt)
3408E and 3412E Engines for Caterpillar Built Machines
Cooling Fan Control - Test
587R Pipelayer Machine Systems
Boom - Remove and Install
3412E Engine for Caterpillar Built Machines
Coolant Flow - Test
Reworking the Pressure Sensor for the Saw Pump{1408, 5057, 6543}
EquipmentManager Dealer Administrator Manual
Fault Codes
24M Motor Grader Power Train
Transmission Hydraulic Control
587R Pipelayer Machine Systems
Main Control Valve - Disassemble
3412E Engine for Caterpillar Built Machines
Electrical Power Supply - Test
587R Pipelayer Machine Systems
Main Control Valve - Assemble
24M Motor Grader Hydraulic and Steering System
Implement System
R1600G Load Haul Dump Power Train
Machine Preparation for Troubleshooting
R1600G Load Haul Dump Steering System
Steering System Troubleshooting
R1600G Load Haul Dump Steering System
System Pressure - Release
R1600G Load Haul Dump Steering System
Steering System Pressure - Test and Adjust
R1600G Load Haul Dump Braking System
System Pressure - Release
R1600G Load Haul Dump Power Train Electronic Control System
Power Train Electronic Control System