Piston Pump (Hydrostatic) - Install
`
226 and 242 Skid Steer Loaders Power Train
[RENR4834]
226 and 242 Skid Steer Loaders Power Train
Piston Pump (Hydrostatic) - Remove
226 and 242 Skid Steer Loaders Power Train
Piston Motor (Hydrostatic) - Remove
POWER TRAIN
PUMP GP
216, 226 and 228 Skid Steer Loaders Powertrain
Piston Pump (Hydrostatic) - Remove
216, 226 and 228 Skid Steer Loaders Powertrain
Piston Pump (Hydrostatic) - Install
226 and 242 Skid Steer Loaders Power Train
Piston Pump (Hydrostatic) - Disassemble
226 and 242 Skid Steer Loaders Power Train
Piston Pump (Hydrostatic) - Assemble
226 and 242 Skid Steer Loaders Power Train
Piston Pump (Hydrostatic) - Remove
226 and 242 Skid Steer Loaders Power Train
Piston Pump (Hydrostatic) - Install
1.1. Installation Procedure
Installation Procedure
Show/hide table
Required Tool     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 159-3327     | Wrench Adapter     | 1     |
- Install piston pump (5). The weight of the piston pump is approximately 61 kg (134 lb).
- Use Tooling (A) to install bolt (6). Torque the bolt to 88 N·m (65 lb ft).
Show/hide table
![]() | |
Illustration 1 | g00912180 |
- Repeat Step 2 for the other side.
- Remove the lifting device from piston pump (5) .
Show/hide table
![]() | |
Illustration 2 | g00912178 |
- Install hose (3). Tighten clamp (4). Connect hose assemblies (2) .
Show/hide table
![]() | |
Illustration 3 | g00903232 |
- Connect hose assemblies (1) .
Show/hide table
![]() | |
Illustration 4 | g00903230 |
End By:
- Install the gear pump. Refer to Disassembly and AssemblyRENR4838, "Gear Pump - Install".
- Install the hydraulic tank. Refer to Disassembly and AssemblyRENR4838, "Hydraulic Tank - Install".
Information System:
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems
Position Sensor (Front Steering) - Remove and Install
3512 and 3516 EUI Engines for Caterpillar Built Machines
Air Inlet and Exhaust System Operation
2002/08/19
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/01
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
226 and 242 Skid Steer Loaders Power Train
Piston Pump (Hydrostatic) - Remove
D350E Series II and D400E Series II Articulated Trucks Power Train
Torque Converter
C11 and C13 Engines for Caterpillar Built Machines
Turbocharger - Inspect
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Steering Control Valve - Assemble
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Steering Control Valve - Disassemble
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0248 - FMI 09
R1600G Load Haul Dump Hydraulic System
System Pressure - Release
R1600G Load Haul Dump Hydraulic System
General Information
226 and 242 Skid Steer Loaders Power Train
Piston Motor (Hydrostatic) - Remove
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Instrument Panel (Side) - Remove
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System
MID 028 - CID 0263 - FMI 00
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Instrument Panel (Side) - Install
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Evaporator Coil - Remove and Install
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Heater Coil - Remove and Install
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System
MID 028 - CID 0263 - FMI 01
3508B Engine for D11R Track-Type Tractors
Engine Cooling Fan Bypass Solenoid
PS-360B Paving Compactor
Fuses - Replace
2002/08/12
Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3256, 3258}
D350E Series II and D400E Series II Articulated Trucks Power Train
Relief Valve (Torque Converter Outlet)
226 and 242 Skid Steer Loaders Power Train
Piston Motor (Hydrostatic) - Install