3524B Engine for Caterpillar Built Machines Coupling Pump - Install Caterpillar


Coupling Pump - Install
`
1.1. Installation Procedure

Installation Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.



NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00912076

  1. Install bolts (6) in order to attach coupling pump (5) and the O-ring seal.


    Illustration 2g00912075

  2. Connect pressure sensor (4) and tube assemblies (3) to coupling pump (5).


    Illustration 3g00912073

  3. Secure harness assembly (2) with cable straps (1).

Information System:

2002/11/25 A New Alternator Guard is Used {1405}
R1600G Load Haul Dump Hydraulic System Lift and Tilt Cylinder Speed - Check
R1600G Load Haul Dump Hydraulic System Lift and Tilt Cylinder Drift - Check
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System MID 028 - CID 0296 - FMI 09
226 and 242 Skid Steer Loaders Power Train Piston Motor (Hydrostatic) - Install
D350E Series II and D400E Series II Articulated Trucks Power Train Relief Valve (Torque Converter Outlet)
2002/08/12 Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3256, 3258}
PS-360B Paving Compactor Fuses - Replace
3508B Engine for D11R Track-Type Tractors Engine Cooling Fan Bypass Solenoid
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System MID 028 - CID 0263 - FMI 01
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Heater Coil - Remove and Install
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Evaporator Coil - Remove and Install
3524B Engine for Caterpillar Built Machines Fuel Transfer Pump - Remove
D350E Series II and D400E Series II Articulated Trucks Power Train Lockup Clutch and Solenoid Valve
R2900 Load Haul Dump Safety Signs and Labels
797 Off-Highway Truck Engine Supplement Fuel Transfer Pump - Install
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Main Control Valve - Integrated Toolcarrier
784C and 785C Off-Highway Truck/Tractors Steering System Steering Accumulator - Test and Charge
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0605 - FMI 02
3524B Engine for Caterpillar Built Machines Exhaust Manifold - Remove and Install
A Procedure for Installation of the Rotor Drive is Available{5611}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Operational Checks (Power Train)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Operational Checks (Brake, Hydraulic Fan System)