Fuel Transfer Pump - Remove
`
3524B Engine for Caterpillar Built Machines
[RENR2276]
3524B Engine for Caterpillar Built Machines
Coupling Pump - Install
3524B Engine for Caterpillar Built Machines
Exhaust Manifold - Remove and Install
FUEL SYSTEM
PUMP GP-FUEL TRANSFER
797 Off-Highway Truck Engine Supplement
Fuel Transfer Pump - Disassemble
3524B Engine for Caterpillar Built Machines
Fuel Transfer Pump - Remove
797 Off-Highway Truck Engine Supplement
Fuel Transfer Pump - Install
3524B Engine for Caterpillar Built Machines
Fuel Transfer Pump - Assemble
1.1. Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 2P-9697 | Plug | 3 |
| 6J-7366 | Flared Cap | 3 | |
| 9S-8927 | Plug | 1 | |
| 8S-4950 | Cap | 1 | |
Note: SERVICE DATA: TOOLING (A) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Shut off the fuel. Refer to Operation and Maintenance Manual, "Fuel System Primary Filter - Clean" for the location of the fuel shutoff valve.
Show/hide table
Illustration 1 g00912451 - Disconnect hose assemblies (2) and tube assemblies (3) from fuel transfer pump (1).
Show/hide table
Illustration 2 g00912452 - Remove bolts (4) in order to remove fuel transfer pump (1) and the O-ring seal.
Show/hide table
Illustration 3 g00912644 - Remove coupling (6) and O-ring seal (5) from fuel transfer pump (1).
Information System:
3524B Engine for Caterpillar Built Machines
Coupling Pump - Install
2002/11/25
A New Alternator Guard is Used {1405}
R1600G Load Haul Dump Hydraulic System
Lift and Tilt Cylinder Speed - Check
R1600G Load Haul Dump Hydraulic System
Lift and Tilt Cylinder Drift - Check
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System
MID 028 - CID 0296 - FMI 09
226 and 242 Skid Steer Loaders Power Train
Piston Motor (Hydrostatic) - Install
D350E Series II and D400E Series II Articulated Trucks Power Train
Relief Valve (Torque Converter Outlet)
2002/08/12
Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3256, 3258}
PS-360B Paving Compactor
Fuses - Replace
3508B Engine for D11R Track-Type Tractors
Engine Cooling Fan Bypass Solenoid
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System
MID 028 - CID 0263 - FMI 01
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Heater Coil - Remove and Install
D350E Series II and D400E Series II Articulated Trucks Power Train
Lockup Clutch and Solenoid Valve
R2900 Load Haul Dump
Safety Signs and Labels
797 Off-Highway Truck Engine Supplement
Fuel Transfer Pump - Install
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System
Main Control Valve - Integrated Toolcarrier
784C and 785C Off-Highway Truck/Tractors Steering System
Steering Accumulator - Test and Charge
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0605 - FMI 02
3524B Engine for Caterpillar Built Machines
Exhaust Manifold - Remove and Install
A Procedure for Installation of the Rotor Drive is Available{5611}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders
Operational Checks (Power Train)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders
Operational Checks (Brake, Hydraulic Fan System)
R1600G Load Haul Dump Steering System
Neutralizer Valve (Implement and Steering) - Test and Adjust