Fuel Transfer Pump - Install
`
797 Off-Highway Truck Engine Supplement
[RENR2035]
797 Off-Highway Truck Engine Supplement
Turbocharger - Remove
797 Off-Highway Truck Engine Supplement
Engine Oil Cooler - Remove
FUEL SYSTEM
PUMP GP-FUEL TRANSFER
797 Off-Highway Truck Engine Supplement
Fuel Transfer Pump - Disassemble
3524B Engine for Caterpillar Built Machines
Fuel Transfer Pump - Remove
797 Off-Highway Truck Engine Supplement
Fuel Transfer Pump - Install
3524B Engine for Caterpillar Built Machines
Fuel Transfer Pump - Assemble
1.1. Installation Procedure
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install O-ring seal (5) and coupling (6) to fuel transfer pump (1).
Show/hide table
Illustration 2 g00912452 - Install bolts (4) in order to attach fuel transfer pump (1) to the engine.
Show/hide table
Illustration 3 g00912451 - Connect tube assemblies (3) and hose assemblies (2) to fuel transfer pump (1).
- Turn on the fuel supply. Refer to Operation and Maintenance Manual, "Fuel System Primary Filter - Clean" for the location of the fuel shutoff valve.
Show/hide table
| |
| Illustration 1 | g00912644 |
Information System:
R2900 Load Haul Dump
Safety Signs and Labels
D350E Series II and D400E Series II Articulated Trucks Power Train
Lockup Clutch and Solenoid Valve
3524B Engine for Caterpillar Built Machines
Fuel Transfer Pump - Remove
3524B Engine for Caterpillar Built Machines
Coupling Pump - Install
2002/11/25
A New Alternator Guard is Used {1405}
R1600G Load Haul Dump Hydraulic System
Lift and Tilt Cylinder Speed - Check
R1600G Load Haul Dump Hydraulic System
Lift and Tilt Cylinder Drift - Check
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System
MID 028 - CID 0296 - FMI 09
226 and 242 Skid Steer Loaders Power Train
Piston Motor (Hydrostatic) - Install
D350E Series II and D400E Series II Articulated Trucks Power Train
Relief Valve (Torque Converter Outlet)
2002/08/12
Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3256, 3258}
PS-360B Paving Compactor
Fuses - Replace
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System
Main Control Valve - Integrated Toolcarrier
784C and 785C Off-Highway Truck/Tractors Steering System
Steering Accumulator - Test and Charge
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0605 - FMI 02
3524B Engine for Caterpillar Built Machines
Exhaust Manifold - Remove and Install
A Procedure for Installation of the Rotor Drive is Available{5611}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders
Operational Checks (Power Train)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders
Operational Checks (Brake, Hydraulic Fan System)
R1600G Load Haul Dump Steering System
Neutralizer Valve (Implement and Steering) - Test and Adjust
R1600G Load Haul Dump Hydraulic System
Relief Valve (Main) - Test and Adjust
R1600G Load Haul Dump Hydraulic System
Relief Valve (Line) - Test and Adjust
3524B Engine for Caterpillar Built Machines
Vibration Damper - Remove and Install