814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Hydraulic Tank - Assemble Caterpillar

Assembly Procedure

Show/hide table

Illustration 1	g00915323

1. Install valve (30), spring (31), tube assembly (32), flange (33), and bolts (34) in each filter base (29).
   Show/hide table

   Illustration 2	g00915296

2. Install suction manifold (28), filter bases (29), the seals, and the bolts.
   Show/hide table

   Illustration 3	g00915295

3. Install ball (24), plate (25), gasket (26), and retaining ring (27) to cap (22).
   Show/hide table

   Illustration 4	g00915294

4. Install strainer (23) and cap (22).
   Show/hide table

   Illustration 5	g00915293

5. Install O-ring seals (20), filters (19) and (21), washers (18), and nuts (17).
   Show/hide table

   Illustration 6	g00915290

6. Install plate (13), grommet (14), glass (15), retainer (16), and bolts (12). Tighten the bolts to a torque of 25 ± 6 N·m (18 ± 4 lb ft).
   Show/hide table

   Illustration 7	g00915287

7. Install guide (9), spring (8), valve (7), seal (6), washers (4), and nuts (3).

8. Install O-ring seal (2) on drain plug (1). Install drain plug (1) in the bottom of the hydraulic tank. Tighten the drain plug to a torque of 68 ± 7 N·m (50 ± 5 lb ft).
   Show/hide table

   Illustration 8	g00915289

9. Install 3G-4090 Sealant to the hydraulic tank. Place the sealant at the inside of the hole pattern.

10. Use two people to install cover (11). The weight of the cover is approximately 32 kg (70 lb). Install bolts (10).

End By:

1. Install the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank - Install".