814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Cab - Install Caterpillar


Cab - Install
`
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems [RENR6106]
OPERATOR STATION
CAB GP
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Cab - Remove
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Cab - Install
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
138-7575  Link Bracket 


    Illustration 1g00912813

  1. Install Tooling (A) and a hoist to the cab, as shown.

  2. Use Tooling (A) and a hoist to position the cab on the machine. The weight of the cab is approximately 1045 kg (2300 lb).


    Illustration 2g00912814

  3. Install four bolts (16) to the inside of the cab.

  4. Install ground strap (17), the nut, and the washer.

  5. Remove Tooling (A) from the machine.


    Illustration 3g00912812

  6. Connect hose assemblies (15).

  7. Connect electrical connectors (13) and (14).


    Illustration 4g00912810

  8. Connect wire assemblies (10) under the cab.

  9. Connect the hose assemblies to service brake control valve (8) and to steering metering pump (9).


    Illustration 5g00912809

  10. Connect air conditioning hose assemblies (6) and (7) to the cab.

  11. Connect heater hose assemblies (5) to the cab.

  12. Install any other hose assemblies, tube assemblies, wire assemblies, and clips that attach to the cab.


    Illustration 6g00912811

  13. Install covers (12) and bolts (11) to the cab.


    Illustration 7g00912808

  14. Install cover (4) and bolts (3) to the cab.


    Illustration 8g00912807

  15. Position cover (1) and install bolts (2).

  16. Fill the cooling system. Refer to Operation and Maintenance Manual for the correct procedure.

  17. If necessary, charge the air conditioning system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.

End By:

  1. Install the steering shaft. Refer to Disassembly and Assembly, "Steering Shaft - Remove and Install".

  2. Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".

Information System:

814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Hydraulic Tank - Assemble
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Hydraulic Tank - Disassemble
226 and 242 Skid Steer Loaders Power Train Axle - Install
226 and 242 Skid Steer Loaders Power Train Axle - Assemble
226 and 242 Skid Steer Loaders Power Train Axle - Disassemble
226 and 242 Skid Steer Loaders Power Train Axle - Remove
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems Cab - Remove
226 and 242 Skid Steer Loaders Power Train Tire and Rim - Remove and Install
226 and 242 Skid Steer Loaders Power Train Solenoid Valve and Mounting (Parking Brake) - Remove and Install
3524B Engine for Caterpillar Built Machines Vibration Damper - Remove and Install
R1600G Load Haul Dump Hydraulic System Relief Valve (Line) - Test and Adjust
R1600G Load Haul Dump Hydraulic System Relief Valve (Main) - Test and Adjust
D350E Series II and D400E Series II Articulated Trucks Power Train Solenoid Valve (Lockup Clutch)
789C Off-Highway Truck Steering System Steering Accumulator - Test and Charge
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Introduction
3524B Engine for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
120H and 135H Motor Graders Machine Systems Fan and Gear Motor (Hydraulic Fan) - Install
R2900 Load Haul Dump Fire Extinguisher Location
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Transmission
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Differential and Final Drive
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Torque Converter
3524B Engine for Caterpillar Built Machines Coupling Oil Filter Base - Remove
3524B Engine for Caterpillar Built Machines Coupling Oil Filter Base - Disassemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System General Information - Integrated Toolcarrier