Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 3R-6789 | Flared Cap | 2 |
5P-2299 | Flared Plug | 2 |
Note: SERVICE DATA: TOOLING (A) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove filter assembly (4) from oil filter base assembly (2).
- Disconnect hose assemblies (3) from oil filter base assembly (2).
- Remove bolts (1) in order to remove oil filter base assembly (2) from the engine.
![]() | |
Illustration 1 | g00912944 |