3524B Engine for Caterpillar Built Machines Engine Oil Pump - Install Caterpillar


Engine Oil Pump - Install
`
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
138-7573  Link Bracket 


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00913196

  1. Attach Tooling (A) and a suitable lifting device to engine oil pump (3). The weight of engine oil pump (3) is approximately 36 kg (80 lb). Position engine oil pump (3) to the engine.

  2. Install bolts (5) in order to attach engine oil pump (3) to the engine.


    Illustration 2g00913194

  3. Connect elbow (4) and the O-ring seal to engine oil pump (3).


    Illustration 3g00913193

  4. Install elbow (2) and the O-ring seal to engine oil pump (3).


    Illustration 4g00913192

  5. Install tube assemblies (1).

  6. Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".

End By:

  1. Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".

Information System:

120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Introduction
554 and 574 Forwarders Power Train Filling and Flushing the Hydrostatic System - Test
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0606 - FMI 02
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Capacities (Refill)
D350E Series II and D400E Series II Articulated Trucks Power Train Priority Valve
3524B Engine for Caterpillar Built Machines Engine Oil Pump - Remove
Installation Procedure for the New Traction Control System{5051}
R1600 Load Haul Dump Machine Electrical System Transmission Oil Temperature
R1600 Load Haul Dump Machine Electrical System Actual Gear Indicator
R1600 Load Haul Dump Machine Electrical System Engine Shutdown
R2900 Load Haul Dump Model Views and Specifications
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Location of Components
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0607 - FMI 02
R2900 Load Haul Dump Plate Locations and Film Locations
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0608 - FMI 02
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0609 - FMI 03
226 and 242 Skid Steer Loaders Power Train Chain (Drive) - Install
226 and 242 Skid Steer Loaders Power Train Chain (Drive) Tension - Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Piston Pump (Hydraulic and Steering)
Field Installation Of 3Z-5855 Jake Brake Modification {1119, 1129, 7314}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Safety Messages
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0609 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0609 - FMI 06
TK711, TK721, TK722 and TK732 Track Feller Bunchers Additional Messages