3524B Engine for Caterpillar Built Machines Engine Oil Cooler - Install Caterpillar


Engine Oil Cooler - Install
`
1.1. Installation Procedure

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00913774

  1. Attach a suitable lifting device to engine oil cooler (4) and position engine oil cooler (4) to the engine. The weight of engine oil cooler (4) is approximately 82 kg (180 lb).

  2. Install bolts (16) in order to secure engine oil cooler (4) to the engine.


    Illustration 2g00913721


    Illustration 3g00913722
    This view is underneath the engine.


    Illustration 4g00913724
    This view is on the left side of the engine.

  3. Install tube assembly (15) to engine oil cooler (4).


    Illustration 5g00913720

  4. Install tube assembly (14) and the O-ring seal to engine oil pump (13).


    Illustration 6g00913719

  5. Install tube assembly (12) and the O-ring seal to engine oil pump (13).


    Illustration 7g00913717

  6. Install tube assembly (11) to the engine.

  7. Install hose assemblies (10) to engine oil cooler (4).


    Illustration 8g00913716

  8. Install tube assemblies (9) to the engine.


    Illustration 9g00913714

  9. Install tube assembly (5) to engine oil cooler (4) and power train oil cooler (8).

  10. Install cable straps (7) in order to secure harness assembly (6).

  11. Connect hose assembly (3) to engine oil cooler (4).


    Illustration 10g00913712

  12. Install tubes (2).


    Illustration 11g00913711

  13. Install tube assemblies (1).

  14. Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".

End By:

  1. Install the fuel priming pump. Refer to Disassembly and Assembly, "Fuel Priming Pump - Remove and Install".

Information System:

938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Clutch (Reverse and Second)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Clutch (Forward High and Forward Low)
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0612 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0612 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0612 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0611 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0610 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0610 - FMI 05
797 Off-Highway Truck Engine Supplement Engine Oil Cooler - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Hydraulic Control
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Clutch (First and Third)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Monitoring System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Transmission Case
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Engine, Torque Converter, Transmission and Output Transfer Gears - Remove
2002/08/19 Correction to Operation and Maintenance Manual , "Caterpillar Monitoring System" {7451, 7490}
2002/08/19 Correction to Operation and Maintenance Manual , "Caterpillar Monitoring System" {7451, 7490}
D250E Series II and D300E Series II Articulated Trucks Power Train Selector and Pressure Control Valve
3524B Engine for Caterpillar Built Machines Engine Oil Cooler - Disassemble
R2900 Load Haul Dump Engine Start Switch
R2900 Load Haul Dump Fire Suppression System (Foam) - If Equipped
143H and 163H Motor Graders All Wheel Drive Location of Electrical Components
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0613 - FMI 03