Engine Oil Cooler - Assemble
`
3524B Engine for Caterpillar Built Machines
[RENR2276]
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Disassemble
3524B Engine for Caterpillar Built Machines
Fuel Filter Base - Remove and Install
COOLING SYSTEM
COOLER GP
3524B Engine for Caterpillar Built Machines
Engine Oil Filter Base - Disassemble
3524B Engine for Caterpillar Built Machines
Engine Oil Filter Base - Assemble
797 Off-Highway Truck Engine Supplement
Engine Oil Cooler - Remove
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Install
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Disassemble
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Assemble
1.1. Assembly Procedure
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install plunger (10) and spring (11) to cooler bypass valve (8). Install bolts (13) in order to attach cover (12) to cooler bypass valve (8).
Show/hide table
Illustration 2 g00913881 - Install bolts (6) in order to attach bonnet (7) and the gasket to core assembly (1).
- Install bolts (9) in order to attach cooler bypass valve (8) to core assembly (1).
Show/hide table
Illustration 3 g00913879 - Install bolts (2) in order to attach bonnet (3) and the gasket to core assembly (1).
- Install bolts (4) in order to attach elbow (5) to core assembly (1).
Show/hide table
| |
| Illustration 1 | g00913883 |
Show/hide table
 |
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
End By:
- Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Information System:
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 03
143H and 163H Motor Graders All Wheel Drive
Location of Electrical Components
R2900 Load Haul Dump
Fire Suppression System (Foam) - If Equipped
R2900 Load Haul Dump
Engine Start Switch
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Disassemble
D250E Series II and D300E Series II Articulated Trucks Power Train
Selector and Pressure Control Valve
2002/08/19
Correction to Operation and Maintenance Manual , "Caterpillar Monitoring System" {7451, 7490}
2002/08/19
Correction to Operation and Maintenance Manual , "Caterpillar Monitoring System" {7451, 7490}
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Transmission Case
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Monitoring System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Clutch (First and Third)
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 05
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 06
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Alternator - Remove and Install
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 00
Installation Procedure for New 190-3692 Pressure Sensor {1408, 3016}
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Electric Starting Motor - Remove and Install
D350E Series II and D400E Series II Articulated Trucks Power Train
Transmission Mounting
120H and 135H Motor Graders
Equipment Lowering with Engine Stopped
793C Off-Highway Truck Machine Systems
Relief Valve (Fan Drive Oil Cooler) - Disassemble
14H Motor Grader 3176C Engine Supplement
Hood - Remove
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 01