Electric Starting Motor - Remove and Install
`
216 and 232 Skid Steer Loaders 3024 Engine Supplement
[RENR4833]
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Alternator - Remove and Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Fuel Filter Group - Remove and Install
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Electric Starting Motor - Remove and Install
1.1. Removal procedure
2.1. Installation Procedure
Removal procedure
Start By:
- Disconnect battery cables. Refer to Disassembly and Assembly, "Battery and Battery Cable - Seperate and Connect".
- Raise cover (1). Remove the nut. Remove cables (2) .
Show/hide table
 | |
| Illustration 1 | g00913999 |
- Remove bolts (3) and the ground cable.
Show/hide table
 | |
| Illustration 2 | g00914002 |
- Raise the cover. Remove screw (5). Disconnect wire (4). Remove electric starting motor (6) .
Show/hide table
 | |
| Illustration 3 | g00914001 |
Installation Procedure
- Connect wire (4). Install screw (5). Lower the cover.
Show/hide table
| | |
| Illustration 4 | g00914001 |
- Install electric starting motor (6). Install bolts (3) and the ground cable.
Show/hide table
| | |
| Illustration 5 | g00914002 |
- Install cables (2). Install the nut. Lower cover (1) .
Show/hide table
| | |
| Illustration 6 | g00913999 |
End By: Connect battery cables. Refer to Disassembly and Assembly, "Battery and Battery Cable - Seperate and Connect".
Information System:
Installation Procedure for New 190-3692 Pressure Sensor {1408, 3016}
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 00
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Alternator - Remove and Install
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 05
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Assemble
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 03
143H and 163H Motor Graders All Wheel Drive
Location of Electrical Components
R2900 Load Haul Dump
Fire Suppression System (Foam) - If Equipped
R2900 Load Haul Dump
Engine Start Switch
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Disassemble
D250E Series II and D300E Series II Articulated Trucks Power Train
Selector and Pressure Control Valve
D350E Series II and D400E Series II Articulated Trucks Power Train
Transmission Mounting
120H and 135H Motor Graders
Equipment Lowering with Engine Stopped
793C Off-Highway Truck Machine Systems
Relief Valve (Fan Drive Oil Cooler) - Disassemble
14H Motor Grader 3176C Engine Supplement
Hood - Remove
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 01
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 04
793C Off-Highway Truck Machine Systems
Relief Valve (Fan Drive Oil Cooler) - Remove
3524B Engine for Caterpillar Built Machines
Fuel Filter Base - Remove and Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Fuel Filter Group - Remove and Install
3524B Engine for Caterpillar Built Machines
Power Train Oil Cooler - Remove and Install
2002/08/26
Correction to Testing and Adjusting , "Specifications (Power Train)" {3000}