Relief Valve (Fan Drive Oil Cooler) - Disassemble
`
793C Off-Highway Truck Machine Systems
[RENR2535]
793C Off-Highway Truck Machine Systems
Oil Cooler Core (Fan Drive) - Remove and Install
793C Off-Highway Truck Machine Systems
Relief Valve (Fan Drive Oil Cooler) - Remove
HYDRAULIC SYSTEM
VALVE GP-RELIEF
793C Off-Highway Truck Machine Systems
Relief Valve (Rear Brake Cooler) - Remove
793C Off-Highway Truck Machine Systems
Relief Valve (Fan Drive Oil Cooler) - Disassemble
793C Off-Highway Truck Machine Systems
Relief Valve (Fan Drive Oil Cooler) - Remove
1.1. Disassembly Procedure
Start By:
- Remove the oil cooler relief valve. Refer to Disassembly and Assembly, "Oil Cooler Relief Valve - Remove".
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
 |
|
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
- Remove plunger (1), springs (2) and (3), and washer (4) from relief valve (5).
Show/hide table
| |
| Illustration 1 | g00914035 |
Show/hide table
|
|
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
Information System:
120H and 135H Motor Graders
Equipment Lowering with Engine Stopped
D350E Series II and D400E Series II Articulated Trucks Power Train
Transmission Mounting
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Electric Starting Motor - Remove and Install
Installation Procedure for New 190-3692 Pressure Sensor {1408, 3016}
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 00
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Alternator - Remove and Install
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 06
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 05
3524B Engine for Caterpillar Built Machines
Engine Oil Cooler - Assemble
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0613 - FMI 03
143H and 163H Motor Graders All Wheel Drive
Location of Electrical Components
R2900 Load Haul Dump
Fire Suppression System (Foam) - If Equipped
14H Motor Grader 3176C Engine Supplement
Hood - Remove
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 03
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 01
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 04
793C Off-Highway Truck Machine Systems
Relief Valve (Fan Drive Oil Cooler) - Remove
3524B Engine for Caterpillar Built Machines
Fuel Filter Base - Remove and Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Fuel Filter Group - Remove and Install
3524B Engine for Caterpillar Built Machines
Power Train Oil Cooler - Remove and Install
2002/08/26
Correction to Testing and Adjusting , "Specifications (Power Train)" {3000}
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement
Engine from Torque Converter, Transmission, Output Transfer Gears - Separate
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0616 - FMI 02
R2900 Load Haul Dump
Computerized Monitoring System (CMS)