Power Train Oil Cooler - Remove and Install
`
3524B Engine for Caterpillar Built Machines
[RENR2276]
3524B Engine for Caterpillar Built Machines
Fuel Filter Base - Remove and Install
3524B Engine for Caterpillar Built Machines
Bearing Clearance - Check
POWER TRAIN
COOLER GP
3524B Engine for Caterpillar Built Machines
Power Train Oil Cooler - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Start By:
- Remove the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Remove".
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove tube assembly (1).
Show/hide table
Illustration 2 g00914142 - Attach a suitable lifting device to power train oil cooler (2).
Show/hide table
Illustration 3 g00914145 Show/hide table
Illustration 4 g00914148 - Remove bolts (3) in order to remove power train oil cooler (2) from the engine. The weight of power train oil cooler (2) is approximately
136 kg (300 lb) .
Show/hide table
| |
| Illustration 1 | g00914137 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Attach a suitable lifting device to power train oil cooler (2) and position power train oil cooler (2) to the engine. The weight of power train oil cooler (2) is approximately
136 kg (300 lb) .Show/hide table
Illustration 6 g00914145 Show/hide table
Illustration 7 g00914148 - Install bolts (3) in order to attach power train oil cooler (2) to the engine.
Show/hide table
Illustration 8 g00914137 - Install tube assembly (1).
Show/hide table
| |
| Illustration 5 | g00914142 |
End By:
- Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Information System:
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Fuel Filter Group - Remove and Install
3524B Engine for Caterpillar Built Machines
Fuel Filter Base - Remove and Install
793C Off-Highway Truck Machine Systems
Relief Valve (Fan Drive Oil Cooler) - Remove
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 04
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 01
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0615 - FMI 03
14H Motor Grader 3176C Engine Supplement
Hood - Remove
793C Off-Highway Truck Machine Systems
Relief Valve (Fan Drive Oil Cooler) - Disassemble
120H and 135H Motor Graders
Equipment Lowering with Engine Stopped
D350E Series II and D400E Series II Articulated Trucks Power Train
Transmission Mounting
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Electric Starting Motor - Remove and Install
Installation Procedure for New 190-3692 Pressure Sensor {1408, 3016}
2002/08/26
Correction to Testing and Adjusting , "Specifications (Power Train)" {3000}
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement
Engine from Torque Converter, Transmission, Output Transfer Gears - Separate
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
MID 028 - CID 0616 - FMI 02
R2900 Load Haul Dump
Computerized Monitoring System (CMS)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Introduction
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Location Of Components
PS-360B Paving Compactor
Cooling System Water Temperature Regulator - Replace
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes
Air Control Valve (Service Brakes)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Location of Components (Hydraulic System)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Ride Control System - Not Equipped With a Relief Valve
D250E Series II and D300E Series II Articulated Trucks Power Train
Transmission Planetary
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Water Temperature Regulator - Remove and Install