814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Engine from Torque Converter, Transmission, Output Transfer Gears - Separate Caterpillar


Engine from Torque Converter, Transmission, Output Transfer Gears - Separate
`
1.1. Separation Procedure

Separation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1P-7409     Eyebolt     1    
B     8S-7615     Pin     2    
8S-7611 Tube     2    
8S-7640 Stand     2    
FT1584 Support Bracket     2    

Start By:

  1. Remove the engine, the torque converter, the transmission, and the output transfer gears. Refer to Disassembly and Assembly, "Engine, Torque Converter, Transmission, and Output Transfer Gears - Remove".


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in AVSpare machines.

Dispose of all fluids according to local regulations and mandates.





    Illustration 1g00915448

  1. Install Tooling (A), suitable lifting chains, and a hoist, as shown.



    Illustration 2g00915450

  1. Install Tooling (B) to the flywheel housing.



    Illustration 3g00915451

  1. Remove bolts (1) .

  1. Use the hoist to carefully separate the torque converter, the transmission, and the output transfer gears from the engine. The weight of torque converter, the transmission, and the output transfer gears as a unit is approximately 1070 kg (2350 lb).

Information System:

2002/08/26 Correction to Testing and Adjusting , "Specifications (Power Train)" {3000}
3524B Engine for Caterpillar Built Machines Power Train Oil Cooler - Remove and Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement Fuel Filter Group - Remove and Install
3524B Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
793C Off-Highway Truck Machine Systems Relief Valve (Fan Drive Oil Cooler) - Remove
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0615 - FMI 04
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0615 - FMI 01
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0615 - FMI 03
14H Motor Grader 3176C Engine Supplement Hood - Remove
793C Off-Highway Truck Machine Systems Relief Valve (Fan Drive Oil Cooler) - Disassemble
120H and 135H Motor Graders Equipment Lowering with Engine Stopped
D350E Series II and D400E Series II Articulated Trucks Power Train Transmission Mounting
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System MID 028 - CID 0616 - FMI 02
R2900 Load Haul Dump Computerized Monitoring System (CMS)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System Introduction
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Location Of Components
PS-360B Paving Compactor Cooling System Water Temperature Regulator - Replace
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Air Control Valve (Service Brakes)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Location of Components (Hydraulic System)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Ride Control System - Not Equipped With a Relief Valve
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission Planetary
216 and 232 Skid Steer Loaders 3024 Engine Supplement Water Temperature Regulator - Remove and Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement Water Pump - Remove and Install
143H and 163H Motor Graders All Wheel Drive Machine Preparation for Troubleshooting