216 and 232 Skid Steer Loaders 3024 Engine Supplement Engine - Install Caterpillar


Engine - Install
`
216 and 232 Skid Steer Loaders 3024 Engine Supplement [RENR4833]
ENGINE ARRANGEMENT
ENGINE AR
216 and 232 Skid Steer Loaders 3024 Engine Supplement Engine - Remove
216 and 232 Skid Steer Loaders 3024 Engine Supplement Engine - Install
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     FT-2741     Chain Assembly     1    
B     159-3327     Wrench Adapter     1    



    Illustration 1g00914926



    Illustration 2g00914925

  1. Install the engine. Install bolts (26). Install nut (25) .



    Illustration 3g00914924



    Illustration 4g00914923

  1. Install mount (24). Install bolts (22). Tighten bolts (23). Install bolt (21) .



    Illustration 5g00827933

  1. Install nut (20) .



    Illustration 6g00827898

  1. Remove Tooling (A) from the engine.



    Illustration 7g00827962

  1. Install bolt (19). Connect harness assembly (18) .



    Illustration 8g00827961

  1. Install the piston pump. Install bolts (17). Use Tooling (B) to torque the bolts to 88 N·m (65 lb ft).

  1. Repeat Step 6 for the other side.



    Illustration 9g00827923

  1. Install cable strap (16). Connect harness assembly (15) .



    Illustration 10g00914922

  1. Install the hose. Tighten clamp (14). Connect harness assembly (13). Install the hose. Tighten clamp (12). Install bolts (11). Torque the bolts to 15 ± 3 N·m (11 ± 2 lb ft).



    Illustration 11g00827914

  1. Install cable strap (10) .



    Illustration 12g00827916

  1. Connect harness assembly (9). Position governor control cable. Install clip (8). Install clip (7). Connect the hose. Tighten clamp (6) .



    Illustration 13g00914921

  1. Connect harness assemblies (5). Install the wire. Install nut (4). Install hoses (3). Tighten clamps (2). Install cable straps (1) .

End By:

  1. Tilt the cab. Refer to Disassembly and Assembly, "Cab Tilt".
  2. Install the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".
  3. Install the starter. Refer to , "Electric Starting Motor - Remove and Install".
  4. Install the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
  5. Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".
  6. Install the radiator and hydraulic oil cooler. Refer to Disassembly and Assembly, "Radiator and Hydraulic Oil Cooler - Install".
  7. Install the battery. Refer to Disassembly and Assembly, "Battery and Battery Cable - Seperate and Connect".

Information System:

216 and 232 Skid Steer Loaders 3024 Engine Supplement Engine - Remove
216 and 232 Skid Steer Loaders 3024 Engine Supplement Muffler - Remove and Install
R2900 Load Haul Dump Light Switches
R2900 Load Haul Dump Indicators
RM-350B Road Reclaimer/Mixer Power Train Piston Pump Control (Rear Propel Pump) - Test and Adjust
D250E Series II and D300E Series II Articulated Trucks Power Train Output Transfer Gear Group
R2900 Load Haul Dump Gauges
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Introduction
143H and 163H Motor Graders All Wheel Drive General Information
216 and 232 Skid Steer Loaders 3024 Engine Supplement Air Cleaner - Remove and Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement Radiator and Hydraulic Oil Cooler - Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement Radiator and Hydraulic Oil Cooler - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
2002/10/07 Changes to the Hood Assembly Improve Service Life {7155, 7251, 7267}
R2900 Load Haul Dump Remote Control Switch - If Equipped
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Cooler - Install
Troubleshooting Failures of the Exhaust Tube on 3408E and 3412E Engines{1061}
3054E Industrial Engine Fuel Injection Pump
2002/09/02 Parts for the Planetary for the A19 Auger Are Now Serviced {5904, 7000}
226 and 242 Skid Steer LoadersEngine Supplement Engine - Remove
14H Motor Grader 3176C Engine Supplement Hood - Install
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Electronic Service Tools
140H and 160H Motor Graders Engine Supplement Fuel Priming Pump - Remove and Install
R2900 Load Haul Dump Air Conditioning and Heating Control