3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Cooler - Install Caterpillar


Engine Oil Cooler - Install
`
1.1. Installation Procedure

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00916150


    Illustration 2g00915024

  1. Install a suitable lifting device onto engine oil cooler (11). The weight of engine oil cooler (11) is approximately 95 kg (210 lb).

  2. Slide engine oil cooler (11) into tube assembly (10).


    Illustration 3g00915021

  3. Install mount bolts (9).


    Illustration 4g00915012

  4. Install mount bolts (8) into the rear of the engine oil cooler.


    Illustration 5g00914993

  5. Install bolts (6) into flange (7).


    Illustration 6g00915174

  6. Install clamp (5).


    Illustration 7g00915172

  7. Install tube assembly (4). Install bolts (3) into the flange. Connect hose assembly (2). Install clamp (1).

Information System:

R2900 Load Haul Dump Remote Control Switch - If Equipped
2002/10/07 Changes to the Hood Assembly Improve Service Life {7155, 7251, 7267}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
216 and 232 Skid Steer Loaders 3024 Engine Supplement Engine - Install
216 and 232 Skid Steer Loaders 3024 Engine Supplement Engine - Remove
216 and 232 Skid Steer Loaders 3024 Engine Supplement Muffler - Remove and Install
R2900 Load Haul Dump Light Switches
R2900 Load Haul Dump Indicators
RM-350B Road Reclaimer/Mixer Power Train Piston Pump Control (Rear Propel Pump) - Test and Adjust
D250E Series II and D300E Series II Articulated Trucks Power Train Output Transfer Gear Group
R2900 Load Haul Dump Gauges
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Introduction
Troubleshooting Failures of the Exhaust Tube on 3408E and 3412E Engines{1061}
3054E Industrial Engine Fuel Injection Pump
2002/09/02 Parts for the Planetary for the A19 Auger Are Now Serviced {5904, 7000}
226 and 242 Skid Steer LoadersEngine Supplement Engine - Remove
14H Motor Grader 3176C Engine Supplement Hood - Install
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Electronic Service Tools
140H and 160H Motor Graders Engine Supplement Fuel Priming Pump - Remove and Install
R2900 Load Haul Dump Air Conditioning and Heating Control
140H and 160H Motor Graders Engine Supplement Muffler - Remove and Install
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Engine, Torque Converter, Transmission and Output Transfer Gears - Install
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Radiator - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Implement Cycle Time - Check