Muffler - Remove and Install
`
140H and 160H Motor Graders Engine Supplement
[RENR4134]
140H and 160H Motor Graders Engine Supplement
Fuel Priming Pump - Remove and Install
140H and 160H Motor Graders Engine Supplement
Engine Oil Filler - Remove and Install
AIR INLET AND EXHAUST SYSTEM
MUFFLER GP
140H and 160H Motor Graders Engine Supplement
Muffler - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Removal Procedure
Start By:
- Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove".
Show/hide table
 |
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
 |
- Disconnect hose (1) .
Show/hide table
 | |
| Illustration 1 | g00993065 |
- Remove clamp (2). Remove bolts (3) and bolts (4) .
- Attach a suitable lifting device to muffler assembly (6). Remove muffler assembly (5). The weight of muffler assembly (5) is approximately 32 kg (70 lb).
Show/hide table
 | |
| Illustration 2 | g00993067 |
- Remove bolts (6) and mounting bracket (7). Remove bolts (8) and mounting bracket (9) .
Show/hide table
 | |
| Illustration 3 | g00993069 |
Installation Procedure
- Install mounting bracket (9) and mounting bracket (7). Install bolts (8). Install bolts (6) .
Show/hide table
| | |
| Illustration 4 | g00993069 |
- Attach a suitable lifting device to muffler assembly (5). Install muffler assembly (5). The weight of muffler assembly (5) is approximately 32 kg (70 lb).
Show/hide table
| | |
| Illustration 5 | g00993067 |
- Install bolts (3) and bolts (4). Install clamp (2) .
Show/hide table
| | |
| Illustration 6 | g00993065 |
- Connect hose (1) .
End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Install".
Information System:
R2900 Load Haul Dump
Air Conditioning and Heating Control
140H and 160H Motor Graders Engine Supplement
Fuel Priming Pump - Remove and Install
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electronic Service Tools
14H Motor Grader 3176C Engine Supplement
Hood - Install
226 and 242 Skid Steer LoadersEngine Supplement
Engine - Remove
2002/09/02
Parts for the Planetary for the A19 Auger Are Now Serviced {5904, 7000}
3054E Industrial Engine
Fuel Injection Pump
Troubleshooting Failures of the Exhaust Tube on 3408E and 3412E Engines{1061}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Engine Oil Cooler - Install
R2900 Load Haul Dump
Remote Control Switch - If Equipped
2002/10/07
Changes to the Hood Assembly Improve Service Life {7155, 7251, 7267}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Engine Oil Cooler - Remove
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Install
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement
Radiator - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Implement Cycle Time - Check
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Pump Performance (Implement) - Test
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Machine Systems
Stick
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Exhaust Manifold - Remove and Install
554 and 574 Forwarders Power Train
Power Train Drive Loop Speed - Test and Adjust
PS-360B Paving Compactor
Light Switches
140H and 160H Motor Graders Engine Supplement
Engine Oil Filler - Remove and Install
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes
Brake Oil Overheating Troubleshooting
793C Off-Highway Truck Machine Systems
Ladder - Remove and Install
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train
Electronic Control (Body Up or Down Sensor)