Engine Oil Filler - Remove and Install
`
140H and 160H Motor Graders Engine Supplement
[RENR4134]
140H and 160H Motor Graders Engine Supplement
Muffler - Remove and Install
140H and 160H Motor Graders Engine Supplement
Refrigerant Compressor - Remove and Install
LUBRICATION SYSTEM
FILLER GP-ENGINE OIL
1.1. Removal Procedure
2.1. Installation Procedure
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | FT-1114     | Vacuum Cap     | 1     |
Start By:
- Remove the fuel tank from the left side of the machine. Refer to Disassembly and Assembly, "Fuel Tank - Remove".
Show/hide table
![]() |
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
![]() |
Show/hide table
![]() |
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
![]() |
- Drain the engine oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct procedure.
- Install Tooling (A) and an air supply. Apply 40 psi to 60 psi of air.
Show/hide table
![]() | |
Illustration 1 | g00934518 |
- Disconnect hose assembly (1). Remove bolts (2). Remove bolts (3) and filler tube (4) .
Show/hide table
![]() | |
Illustration 2 | g00990747 |
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | FT-1114     | Vacuum Cap     | 1     |
- Install filler tube (4) and install bolts (3). Install bolts (2). Connect hose assembly (1) .
Show/hide table
![]() | |
Illustration 3 | g00990747 |
- Remove Tooling (A) .
Show/hide table
![]() | |
Illustration 4 | g00934518 |
- Refill the engine with engine oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct procedure.
- Check the hydraulic oil level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" for the correct procedure.
End By: Install the fuel tank from the left side of the machine. Refer to Disassembly and Assembly, "Fuel Tank - Install".
Information System:
PS-360B Paving Compactor
Light Switches
554 and 574 Forwarders Power Train
Power Train Drive Loop Speed - Test and Adjust
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Exhaust Manifold - Remove and Install
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Machine Systems
Stick
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Pump Performance (Implement) - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Implement Cycle Time - Check
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement
Radiator - Remove
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Install
140H and 160H Motor Graders Engine Supplement
Muffler - Remove and Install
R2900 Load Haul Dump
Air Conditioning and Heating Control
140H and 160H Motor Graders Engine Supplement
Fuel Priming Pump - Remove and Install
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Electronic Service Tools
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes
Brake Oil Overheating Troubleshooting
793C Off-Highway Truck Machine Systems
Ladder - Remove and Install
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train
Electronic Control (Body Up or Down Sensor)
574B Forwarder Power Train
Power Train Drive Loop Speed - Test and Adjust
3054E Industrial Engine
Crankshaft - Steel Crankshaft
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement
Engine to Torque Converter, Transmission, Output Transfer Gears - Connect
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement
Muffler - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Tilt Cylinder - Isolation and Drift Check - Integrated Toolcarrier
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement
Muffler - Install
Bench Test Procedure For A 735 Articulated Truck Transmission {3030, 3073, 3139}
R2900 Load Haul Dump
Alternate Exit
2002/09/16
A Guard Extends the Service Life of the Lift Cylinder Lubrication Hose {7510}