814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Engine to Torque Converter, Transmission, Output Transfer Gears - Connect Caterpillar


Engine to Torque Converter, Transmission, Output Transfer Gears - Connect
`
1.1. Connection Procedure

Connection Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1P-7409     Eyebolt     1    
B     8S-7615     Pin     2    
8S-7611 Tube     2    
8S-7640 Stand     2    
FT1584 Support Bracket     2    



    Illustration 1g00915448

  1. Install Tooling (A), suitable lifting chains, and a hoist, as shown.

  1. Use the hoist to position the torque converter, the transmission, and the output transfer gears on the engine. The weight of torque converter, the transmission, and the output transfer gears as a unit is approximately 1070 kg (2350 lb).



    Illustration 2g00915451

  1. Install bolts (1) .



    Illustration 3g00915450

  1. Remove Tooling (B) from the flywheel housing.

End By: Install the engine, the torque converter, the transmission, and the output transfer gears. Refer to Disassembly and Assembly, "Engine, Torque Converter, Transmission, and Output Transfer Gears - Install".

Information System:

3054E Industrial Engine Crankshaft - Steel Crankshaft
574B Forwarder Power Train Power Train Drive Loop Speed - Test and Adjust
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Electronic Control (Body Up or Down Sensor)
793C Off-Highway Truck Machine Systems Ladder - Remove and Install
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Brake Oil Overheating Troubleshooting
140H and 160H Motor Graders Engine Supplement Engine Oil Filler - Remove and Install
PS-360B Paving Compactor Light Switches
554 and 574 Forwarders Power Train Power Train Drive Loop Speed - Test and Adjust
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Machine Systems Stick
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Pump Performance (Implement) - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Implement Cycle Time - Check
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Muffler - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Tilt Cylinder - Isolation and Drift Check - Integrated Toolcarrier
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Muffler - Install
Bench Test Procedure For A 735 Articulated Truck Transmission {3030, 3073, 3139}
R2900 Load Haul Dump Alternate Exit
2002/09/16 A Guard Extends the Service Life of the Lift Cylinder Lubrication Hose {7510}
R1600G Load Haul Dump Braking System Pressure Reducing Valve (Pilot Oil) - Test and Adjust
D350E Series II and D400E Series II Articulated Trucks Power Train Transmission Planetary
247 and 257 Multi Terrain Loaders Quick Coupler
3508B Engine for D11R Track-Type Tractors Event Codes
D350E Series II and D400E Series II Articulated Trucks Power Train Differential and Bevel Gear
120H and 135H Motor Graders Reference Material