Pump Mounting - Remove and Install
`
216 and 232 Skid Steer Loaders 3024 Engine Supplement
[RENR4833]
POWER TRAIN
DRIVE GP
216 and 232 Skid Steer Loaders 3024 Engine Supplement
Pump Mounting - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 180-3033 | Stand | 1 |
| B | 180-3034 | Stand | 2 |
| C | 9S-3263 | Thread Lock Compound | 1 |
Start By:
- Remove the engine. Refer to Disassembly and Assembly, "Engine - Remove".
- Use Tooling (A) and (B) to support the engine. Remove bolts (1). Remove clip (2). Remove adapter plate (3) .
Show/hide table
 | |
| Illustration 1 | g00916194 |
- Remove bolts (4). Remove nylon flange (5) .
Show/hide table
 | |
| Illustration 2 | g00916200 |
- Remove bolts (7). Remove hub (6) .
Show/hide table
 | |
| Illustration 3 | g00916196 |
Installation Procedure
- Install hub (6). The face of hub (6) must be installed to a dimension of 83.9 ± 2 mm (3.3 ± 0.08 inch) from the face of the pump. This dimension is shown in the graphic above as Dimension (X). Apply Tooling (C) to bolts (7). Torque the bolts to 25 ± 5 N·m (18 ± 4 lb ft).
Show/hide table
| | |
| Illustration 4 | g00916196 |
- Install nylon flange (5). Install bolts (4) .
Show/hide table
| | |
| Illustration 5 | g00916200 |
- Install adapter plate (3). Install clip (2). Install bolts (1) .
Show/hide table
| | |
| Illustration 6 | g00916194 |
End By: Install the engine. Refer to Disassembly and Assembly, "Engine - Install".
Information System:
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes
Service Brakes and Retarder System Leakage - Check
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Propel System
Drum Drive Group
CB-634D Paving Compactor Machine Electronic Control System
Water Spray Is Always Off
3054E Industrial Engine
Engine Oil Filter
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement
Radiator - Install
561N Pipelayer
Plate Locations and Film Locations
120H and 135H Motor Graders
Safety Messages
561N Pipelayer
Specifications
12H Motor Grader
Reference Material
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System
Piston Pump (Steering) Margin Pressure - Test and Adjust
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Steering System
Piston Pump (Steering) Low Pressure Standby - Test
120H and 135H Motor Graders Machine Systems
Air Control Valve (Parking Brake) - Disassemble
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Features
554 and 574 Forwarders Power Train
Gearshift Pressures - Test - 574 Forwarder 1FM434-UP
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes
Service Brakes and Retarder System Pressure - Test
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System
Proportional Pressure Solenoid Valve - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders
Electronic Control Module (Power Train)
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems
Radiator and Hydraulic Oil Cooler
Bench Test Procedure for a 784B, 784C, 785, 785B, 785C,785D, 789, and 789B Off-Highway Truck Transmission{3030, 3073}
226 and 242 Skid Steer LoadersEngine Supplement
Pump Mounting - Remove and Install
2002/11/11
New Mirror Has Improved Durability and a New Support that Reduces Vibration {7319}
R2900 Load Haul Dump
Steering Control
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes
Hoist, Torque Converter, and Brake System Troubleshooting
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes
Pulled Unit Hydraulics, Torque Converter, and Brake System Troubleshooting