Engine Trunnion - Remove and Install
`
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
[SENR1126]
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Exhaust Manifold - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Engine Oil Pump - Remove
BASIC ENGINE
MOUNTING GP-ENGINE
1.1. Removal Procedure
2.1. Installation Procedure
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 180-3034 | Repair Stand Set | 1 |
B | - | Guide Bolts
1/2 - 13 NC by 8 inch |
2 |
Start By:
- Remove the vibration damper. Refer to Disassembly and Assembly, "Vibration Damper - Remove and Install".
- Use a suitable lifting device and lift up the front of the engine and set the engine on Tooling (A). The weight of the engine is approximately
4490 kg (9900 lb) . Remove two bolts (1).Show/hide tableIllustration 2 g01210000 - Install Tooling (B). Remove remaining bolts (1).
Show/hide table
Illustration 3 g00916552 - Slide engine trunnion (2) outward and install a suitable lifting device to engine trunnion (2). Remove engine trunnion (2). The weight of engine trunnion (2) is approximately
54 kg (120 lb) .
Show/hide table
![]() | |
Illustration 1 | g00916548 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 180-3034 | Repair Stand Set | 1 |
B | - | Guide Bolts
1/2 - 13 NC by 8 inch |
2 |
- Install a suitable lifting device to engine trunnion (2). Position engine trunnion (2) and slide engine trunnion (2) onto Tooling (B). The weight of engine trunnion (2) is approximately
54 kg (120 lb) .Show/hide tableIllustration 5 g01210000 - Install bolts (1). Remove Tooling (B).
Show/hide table
Illustration 6 g00916548 - Install remaining bolts (1). Use a suitable lifting device and lift up the front of the engine. Remove Tooling (A). The weight of the engine is approximately
4490 kg (9900 lb) .
Show/hide table
![]() | |
Illustration 4 | g00916552 |
End By:
- Install the vibration damper. Refer to Disassembly and Assembly, "Vibration Damper - Remove and Install".
Information System:
Air Conditioning and Heating R-12 All Caterpillar Machines
General Information
2002/09/16
New Pins for the Bulldozer Blade are Now Greased {6061, 6065, 6066}
2003/04/21
A Sight Gauge for the Transmission Oil Level and an Oil Filler Tube at Ground Level are Available {3030}
Air Conditioning and Heating R-12 All Caterpillar Machines
Machine Preparation for Disassembly and Assembly
574B Forwarder Power Train
Power Train Charge System Pressure - Test
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes
Pulled Unit Hydraulics, Torque Converter, and Brake System Troubleshooting
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes
Hoist, Torque Converter, and Brake System Troubleshooting
R2900 Load Haul Dump
Steering Control
2002/11/11
New Mirror Has Improved Durability and a New Support that Reduces Vibration {7319}
226 and 242 Skid Steer LoadersEngine Supplement
Pump Mounting - Remove and Install
Bench Test Procedure for a 784B, 784C, 785, 785B, 785C,785D, 789, and 789B Off-Highway Truck Transmission{3030, 3073}
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems
Radiator and Hydraulic Oil Cooler
Air Conditioning and Heating R-12 All Caterpillar Machines
Refrigerant Compressor - Remove and Install
Air Conditioning and Heating R-12 All Caterpillar Machines
Receiver-Dryer - Remove and Install
Air Conditioning and Heating R-12 All Caterpillar Machines
Refrigerant Orifice Tube - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System
Main Control Valve
R2900 Load Haul Dump
Joystick Control
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Engine Oil Pump - Remove
R2900 Load Haul Dump
Autodig System - If Equipped
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train
Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission)
120H and 135H Motor Graders Machine Systems
Air Control Valve (Parking Brake) - Assemble
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train
Transmission Control
2002/11/18
New High Pressure Oil Hose Assembly Offers Added Flexibility for Thermal Expansion {1714, 7554}
2002/09/02
New Tachometers Provide Increased Service Life {7462}