226 and 242 Skid Steer LoadersEngine Supplement Engine - Install Caterpillar

Installation Procedure

Show/hide table



Illustration 1	g00915596

Show/hide table



Illustration 2	g00915595

1. Install the engine. Install bolts (24). Secure hose (22). Install nut (23) .

Show/hide table



Illustration 3	g00915585

2. Install mount (20). Install bolts (19). Install nut (21). Torque the nut to 120 ± 10 N·m (89 ± 7 lb ft).

Show/hide table



Illustration 4	g00916767

3. Remove Tooling (A) from the engine.

Show/hide table



Illustration 5	g00916766

4. Secure hose (17). Install bolt (18) .

Show/hide table



Illustration 6	g00915153

5. Install cable strap (16) .

Show/hide table



Illustration 7	g00915545

6. Connect harness assembly (15). Install hose (14). Tighten clamp (13) .

Show/hide table



Illustration 8	g00915152

7. Install cable straps (12). Connect wire (10). Install nut (11) .

Show/hide table



Illustration 9	g00915151

8. Connect wire (9). Connect harness assembly (8) .

Show/hide table



Illustration 10	g00915148

9. Connect hose assemblies (5). Position governor cable (6). Install clip (7). Tighten nut (4) .

Show/hide table



Illustration 11	g00916765

Note: The piston pump is removed for photographic purposes.

10. Install bolt (3). Connect harness assembly (2) .

Show/hide table



Illustration 12	g00916768

11. Install bolts (1). Use Tooling (B) to torque the bolts to 88 N·m (65 lb ft).

End By:

1. Tilt the cab. Refer to Disassembly and Assembly, "Cab Tilt".
2. Install the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".
3. Install the starter. Refer to , "Electric Starting Motor - Remove and Install".
4. Install the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
5. Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".
6. Install the radiator and hydraulic oil cooler. Refer to Disassembly and Assembly, "Radiator and Hydraulic Oil Cooler - Install".