Alternator - Remove and Install
`
140H and 160H Motor Graders Engine Supplement
[RENR4134]
140H and 160H Motor Graders Engine Supplement
Water Separator and Fuel Filter (Primary) - Remove and Install
140H and 160H Motor Graders Engine Supplement
Air Cleaner - Remove and Install
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
140H and 160H Motor Graders Engine Supplement
Alternator - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Removal Procedure
Show/hide table
 |
Personal injury can result from failure to disconnect the battery. First, disconnect the negative battery cable. Then, disconnect the positive battery cable. A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire. |
 |
- Turn the key for the battery disconnect switch to the OFF position. Remove the key.
- Remove bolts (1) and remove cover (2) .
Show/hide table
 | |
| Illustration 1 | g00918252 |
- Remove belt (3) from pulley (4). Refer to Operation and Maintenance Manual, "Belt - Replace" for the correct procedure.
Show/hide table
 | |
| Illustration 2 | g00918255 |
- Disconnect wires (5). Remove bolts (6) and guard (7). Remove bolts (8) and remove alternator (9) .
Show/hide table
 | |
| Illustration 3 | g00993174 |
Installation Procedure
- Install alternator (9) and install bolts (8). Install guard (7) and bolts (6). Connect wires (5) .
Show/hide table
| | |
| Illustration 4 | g00993174 |
- Install belt (3) on pulley (4). Refer to Operation and Maintenance Manual, "Belt - Replace" for the correct procedure.
Show/hide table
| | |
| Illustration 5 | g00918255 |
- Install cover (2). Install bolts (1) .
Show/hide table
| | |
| Illustration 6 | g00918252 |
- Install the key. Turn the key for the battery disconnect switch to the ON position.
Information System:
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems
Rollover Protective Structure (ROPS) - Remove and Install
D350E Series II and D400E Series II Articulated Trucks Power Train
Output Transfer Gear Group
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Vane Pump (Implement, Pilot, Brake)
2002/09/16
An Updated Air Starting Control Group Improves Durability of the Lines {5500, 5501}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Aftercooler - Remove and Install - Aftercooler Housing with 12 bolts
14H Motor Grader Power Train
Gear Pump (Transmission Charging and Scavenge) - Disassemble
14H Motor Grader Power Train
Gear Pump (Transmission Charging and Scavenge) - Assemble
R1600G Load Haul Dump Hydraulic System
Sequence Valve (Float) - Test and Adjust
R1600 Load Haul Dump Hydraulic System
Relief Valve (Lift Circuit) - Test and Adjust
R2900 Load Haul Dump
Operation (Remote Control)
R2900 Load Haul Dump
Before Operation (Remote Control)
143H and 163H Motor Graders 3176C Engine Supplement
Battery - Remove and Install
R2900 Load Haul Dump
Parking (Remote Control)
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
Diagnostic Code List
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
Service Tools
574B Forwarder Power Train
Hydrostatic Drive System Performance - Test
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System
Features
Installation Guide for the Machine Security System on Skid Steer Loaders{7631}
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
Connector Contact Description
140H and 160H Motor Graders Engine Supplement
Air Cleaner - Remove and Install
AP555E and BG555E Asphalt Pavers Machine Systems
Hydraulic Cylinder (Truck Hitch)
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Electric Starting Motor - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Fuel Priming Pump - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Air Inlet Manifold - Remove and Install