EPC Parts Catalogs

140H and 160H Motor Graders Engine Supplement Air Cleaner - Remove and Install Caterpillar


  1. Home
  2. Disassembly and Assembly
  3. #93346
Air Cleaner - Remove and Install
`
140H and 160H Motor Graders Engine Supplement [RENR4134]
140H and 160H Motor Graders Engine Supplement Alternator - Remove and Install
140H and 160H Motor Graders Engine Supplement Water Pump - Remove
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
140H and 160H Motor Graders Engine Supplement Air Cleaner - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Start By:

  1. Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
    Show/hide table

    Illustration 1g00918404

  1. Loosen clamp (1) and disconnect hose (2). Loosen clamp (3) and rotate hose (2) out of the way.
    Show/hide table

    Illustration 2g00918406

  1. Remove bolts (4) .
    Show/hide table

    Illustration 3g00918407

  1. Disconnect hose (5) .
    Show/hide table

    Illustration 4g00918409

  1. Remove bolts (6) .
    Show/hide table

    Illustration 5g00918411

  1. Attach a suitable lifting device to air cleaner (7). Remove air cleaner (7). The weight of air cleaner (7) is approximately 27 kg (60 lb).
    Show/hide table

    Illustration 6g00918414

  1. Remove bolts (8) and remove plate (9) .

Installation Procedure

    Show/hide table

    Illustration 7g00918414

  1. Install plate (9) and install bolts (8) .
    Show/hide table

    Illustration 8g00918411

  1. Attach a suitable lifting device to air cleaner (7). Install air cleaner (7). The weight of air cleaner (7) is approximately 27 kg (60 lb).
    Show/hide table

    Illustration 9g00918409

  1. Install bolts (6) .
    Show/hide table

    Illustration 10g00918407

  1. Connect hose (5) .
    Show/hide table

    Illustration 11g00918406

  1. Install bolts (4) .
    Show/hide table

    Illustration 12g00918404

  1. Position hose (2) to the original location and tighten clamp (3). Connect hose (2) and tighten clamp (1) .

End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".

Information System:

IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader Connector Contact Description
Installation Guide for the Machine Security System on Skid Steer Loaders{7631}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Features
574B Forwarder Power Train Hydrostatic Drive System Performance - Test
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader Service Tools
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader Diagnostic Code List
R2900 Load Haul Dump Parking (Remote Control)
140H and 160H Motor Graders Engine Supplement Alternator - Remove and Install
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
D350E Series II and D400E Series II Articulated Trucks Power Train Output Transfer Gear Group
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System Vane Pump (Implement, Pilot, Brake)
2002/09/16 An Updated Air Starting Control Group Improves Durability of the Lines {5500, 5501}
AP555E and BG555E Asphalt Pavers Machine Systems Hydraulic Cylinder (Truck Hitch)
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Air Inlet Manifold - Remove and Install
574B Forwarder Hydraulic System Steering Cylinder Pressure - Test and Adjust
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Electrical Components
14H Motor Grader 3176C Engine Supplement Air Compressor - Remove
C9 Engine For Caterpillar Built Machines Engine Oil Pump - Remove
3524B Engine for Caterpillar Built Machines Fuel Transfer Pump - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Pilot Valve (Joystick)
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0070 - FMI 03
3054E Industrial Engine Front Housing and Covers