Fuel Priming Pump - Remove and Install
`
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
[SENR1126]
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Electric Starting Motor - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Air Inlet Manifold - Remove and Install
FUEL SYSTEM
PUMP GP-FUEL PRIMING
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Fuel Priming Pump - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Turn OFF the fuel supply to the engine.
Show/hide table
Illustration 1 g00599551 - Remove bolts (1).
- Remove bolts (2).
- Remove fuel priming pump (3).
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Place fuel priming pump (3) into position.
- Install bolts (2).
- Install bolts (1).
- Turn ON the fuel supply to the engine.
Show/hide table
| |
| Illustration 2 | g00599551 |
Information System:
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Electric Starting Motor - Remove and Install
AP555E and BG555E Asphalt Pavers Machine Systems
Hydraulic Cylinder (Truck Hitch)
140H and 160H Motor Graders Engine Supplement
Air Cleaner - Remove and Install
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
Connector Contact Description
Installation Guide for the Machine Security System on Skid Steer Loaders{7631}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System
Features
574B Forwarder Power Train
Hydrostatic Drive System Performance - Test
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
Service Tools
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
Diagnostic Code List
R2900 Load Haul Dump
Parking (Remote Control)
140H and 160H Motor Graders Engine Supplement
Alternator - Remove and Install
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems
Rollover Protective Structure (ROPS) - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Air Inlet Manifold - Remove and Install
574B Forwarder Hydraulic System
Steering Cylinder Pressure - Test and Adjust
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System
Electrical Components
14H Motor Grader 3176C Engine Supplement
Air Compressor - Remove
C9 Engine For Caterpillar Built Machines
Engine Oil Pump - Remove
3524B Engine for Caterpillar Built Machines
Fuel Transfer Pump - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System
Pilot Valve (Joystick)
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0070 - FMI 03
3054E Industrial Engine
Front Housing and Covers
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0070 - FMI 04
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Turbocharger - Disassemble
14H Motor Grader 3176C Engine Supplement
Air Compressor - Install