C9 Engine For Caterpillar Built Machines Engine Oil Pump - Remove Caterpillar


Engine Oil Pump - Remove
`
1.1. Removal Procedure

Removal Procedure

Start By:

  1. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.



NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g00782126

  1. Remove bolts (2).

  2. Remove engine oil pump (1).

  3. Remove the O-ring seal that is located between the cylinder block and the outlet elbow.

Information System:

14H Motor Grader 3176C Engine Supplement Air Compressor - Remove
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Electrical Components
574B Forwarder Hydraulic System Steering Cylinder Pressure - Test and Adjust
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Air Inlet Manifold - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
AP555E and BG555E Asphalt Pavers Machine Systems Hydraulic Cylinder (Truck Hitch)
140H and 160H Motor Graders Engine Supplement Air Cleaner - Remove and Install
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader Connector Contact Description
Installation Guide for the Machine Security System on Skid Steer Loaders{7631}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Features
574B Forwarder Power Train Hydrostatic Drive System Performance - Test
3524B Engine for Caterpillar Built Machines Fuel Transfer Pump - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Pilot Valve (Joystick)
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0070 - FMI 03
3054E Industrial Engine Front Housing and Covers
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0070 - FMI 04
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Turbocharger - Disassemble
14H Motor Grader 3176C Engine Supplement Air Compressor - Install
3054E Industrial Engine Gear Group (Front)
574B Forwarder Hydraulic System Boom Tilt Cylinder and Gate Cylinder (Horizontal) Pressure - Test and Adjust
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Piston Pump (Hydraulic Fan)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Oscillating Axle Housing
247 and 257 Multi Terrain Loaders Power Train Piston Motor (Hydrostatic) - Remove