Piston Motor (Hydrostatic) - Remove
`
247 and 257 Multi Terrain Loaders Power Train
[RENR4859]
247 and 257 Multi Terrain Loaders Power Train
Track (Rubber) - Remove and Install
247 and 257 Multi Terrain Loaders Power Train
Piston Motor (Hydrostatic) - Install
POWER TRAIN
MOTOR GP
247 and 257 Multi Terrain Loaders Power Train
Piston Motor (Hydrostatic) - Disassemble
247 and 257 Multi Terrain Loaders Power Train
Piston Motor (Hydrostatic) - Assemble
247 and 257 Multi Terrain Loaders Power Train
Piston Motor (Hydrostatic) - Remove
247 and 257 Multi Terrain Loaders Power Train
Piston Motor (Hydrostatic) - Install
1.1. Removal Procedure
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Brackets | 2 |
Start By:
- Disassemble the track drive. Refer to Disassembly and Assembly, "Track Drive - Disassemble".
- Use a suitable lifting device to place track drive on blocks. The weight of the track drive is approximately 77 kg (170 lb). Remove bolts (1). Use a suitable lifting device and Tooling (A) to remove piston motor (2). The weight of the piston motor is approximately 50 kg (110 lb).
Show/hide table
 | |
| Illustration 1 | g00880735 |
Show/hide table
 | |
| Illustration 2 | g00918729 |
Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Oscillating Axle Housing
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System
Piston Pump (Hydraulic Fan)
574B Forwarder Hydraulic System
Boom Tilt Cylinder and Gate Cylinder (Horizontal) Pressure - Test and Adjust
3054E Industrial Engine
Gear Group (Front)
14H Motor Grader 3176C Engine Supplement
Air Compressor - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Turbocharger - Disassemble
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0070 - FMI 04
3054E Industrial Engine
Front Housing and Covers
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0070 - FMI 03
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System
Pilot Valve (Joystick)
3524B Engine for Caterpillar Built Machines
Fuel Transfer Pump - Assemble
C9 Engine For Caterpillar Built Machines
Engine Oil Pump - Remove
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0248 - FMI 12
CB-534D and CB-564D Asphalt Compactors
Cooling System Water Temperature Regulator - Replace
574B Forwarder Hydraulic System
Grapple Cylinder Pressure - Test and Adjust
2002/11/04
A New Control Valve Improves the Service Life of the Transmission {3073}
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0367 - FMI 02
574B Forwarder Hydraulic System
Extendable Stick Cylinder Pressure - Test and Adjust
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0368 - FMI 03
574B Forwarder Hydraulic System
Combination Valve (Ladder) - Test and Adjust
R1600G Load Haul Dump Hydraulic System
Lift Arm Positioner - Adjust
R1600 Load Haul Dump Hydraulic System
Ride Control Accumulator - Test and Charge
14H Motor Grader 3176C Engine Supplement
Radiator Guard and Support, Aftercooler, and Radiator - Remove
AP-655C and BG-2255C Asphalt Pavers
Operator Controls - Main Console