Seat - Remove and Install
`
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems
[KENR3127]
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems
Rollover Protective Structure (ROPS) - Remove and Install
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems
Instrument Console (Front) - Remove and Install
OPERATOR STATION
SEAT GP
1.1. Removal Procedure
2.1. Installation Procedure
Removal Procedure
- Remove bolts (2) from seat (1) .
Show/hide table
![]() | |
Illustration 1 | g00918990 |
Show/hide table
![]() | |
Illustration 2 | g00918991 |
- Use two persons and remove seat (1) from the machine. The weight of the seat is approximately 38 kg (83 lb).
Installation Procedure
- Use two persons and install seat (1) on the machine. The weight of the seat is approximately 38 kg (83 lb).
Show/hide table
![]() | |
Illustration 3 | g00918991 |
Show/hide table
![]() | |
Illustration 4 | g00918990 |
- Install bolts (2) on seat (1) .
Information System:
14H Motor Grader Power Train
Transmission and Transfer Gears - Assemble
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0795 - FMI 06
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0795 - FMI 05
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0795 - FMI 03
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Integrated Braking System
938G II Wheel Loader and IT38G II Integrated Toolcarrier
Specifications
AP-655C and BG-2255C Asphalt Pavers
Operator Controls - Main Console
14H Motor Grader 3176C Engine Supplement
Radiator Guard and Support, Aftercooler, and Radiator - Remove
R1600 Load Haul Dump Hydraulic System
Ride Control Accumulator - Test and Charge
R1600G Load Haul Dump Hydraulic System
Lift Arm Positioner - Adjust
574B Forwarder Hydraulic System
Combination Valve (Ladder) - Test and Adjust
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0368 - FMI 03
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0585 - FMI 02
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0590 - FMI 09
CB-534D and CB-564D Asphalt Compactors
Eccentric Weight Housing Oil - Change
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0672 - FMI 01
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0673 - FMI 02
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System
Relief Valve (Charge) - Test and Adjust
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System
Relief Valve (Main) - Test and Adjust
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System
Relief Valve (Pressure Override) - Test and Adjust
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System
Pump Synchronization - Test and Adjust
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System
Piston Pump Neutral - Test and Adjust
2002/09/16
A New Temperature Switch is Used for the Axle Oil Cooler System {5073}
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
MID 081 - CID 0674 - FMI 02