2007/08/06 Radiator and Hydraulic Oil Coolers Have Been Improved {1351} Caterpillar


Radiator and Hydraulic Oil Coolers Have Been Improved {1351}
`
2007/08/06 [SEPD0900]
COOLING SYSTEM
RADIATOR GP
2007/08/06 Radiator and Hydraulic Oil Coolers Have Been Improved {1351}
Multi Terrain Loader:
267B (S/N: CYC140-UP)
277B (S/N: MDH210-UP)
287B (S/N: ZSA280-UP)
Skid Steer Loader:
236B (S/N: HEN250-UP)
246B (S/N: PAT300-UP)
248B (S/N: SCL200-UP)
252B (S/N: SCP240-UP)
262B (S/N: PDT150-UP)
268B (S/N: LBA250-UP)
Service Magazine SEPD0897, 16 July 2007, "A New Radiator Is Available". Disregard this article. See the article that follows.

Description of Change: The radiator and hydraulic oil coolers for the listed machines have been improved. The new coolers have a more rugged design. The new coolers are more resilient to thermal stresses.

Adaptable To: The new 280-8312 Radiator and Hydraulic Oil Cooler As has replaced the former 221-9126 Radiator and Hydraulic Oil Cooler As. The former cooler has been cancelled.

The new 280-8313 Radiator and Hydraulic Oil Cooler As has replaced the former 276-3075 Radiator and Hydraulic Oil Cooler As. The former cooler has been cancelled.

Table 1
280-8312 Radiator and Hydraulic Oil Cooler As    
Machine     Effectivity     Adaptability    
236B     (S/N: HEN6112-UP)     (S/N: HEN250-6111)    
246B     -     (S/N: PAT300-UP)    
248B     -     (S/N: SCL200-UP)    
252B     (S/N: SCP4121-UP)     (S/N: SCP240-4120)    
262B     -     (S/N: PDT150-UP)    
267B     -     (S/N: CYC140-UP)    
268B     -     (S/N: LBA250-UP)    
277B     -     (S/N: MDH210-UP)    
287B     -     (S/N: ZSA280-UP)    

Table 2
280-8313 Radiator and Hydraulic Oil Cooler As (1)    
Machine     Effectivity     Adaptability    
236B     -     (S/N: HEN250-UP)    
246B     -     (S/N: PAT300-UP)    
248B     -     (S/N: SCL200-UP)    
262B     -     (S/N: PDT150-UP)    
268B     -     (S/N: LBA250-UP)    
277B     -     (S/N: MDH210-UP)    
287B     -     (S/N: ZSA280-UP)    
( 1 ) Machines with sound suppression

Information System:

C15 and C18 Generator Set Engines Radiator Bottom Tank - Remove and Install - Charge Air
2007/07/02 New Routing of Wiring Harness for Pressure Sensor {1408, 5057, 6543}
C15 and C18 Generator Set Engines Radiator Top Tank - Remove and Install - Charge Air
AP655D and BG655D Asphalt Pavers Propel System Piston Motor (Propel) - Steel Track Machine
160M and 160 Motor Grader Machine Systems Bank Valve - Remove - Rear Frame
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Idler Axle - Disassemble
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 157 - CID 0967 - FMI 02
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 156 - CID 0967 - FMI 02
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 082 - CID 0967 - FMI 02
2007/07/09 New Installation Sleeves for the Transmission Clutches Are Now Available {0720, 3030, 3155}
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install - Electric Fuel Priming Pump
AP655D and BG655D Asphalt Pavers Propel System Piston Pump (Propel) - Steel Track Machine
C4.4 and C6.6 Engines for Caterpillar Built Machines Low Power/Poor or No Response to Throttle
C4.4 and C6.6 Engines for Caterpillar Built Machines Diagnostic Code Cross Reference
AP655D and BG655D Asphalt Pavers Propel System Hydraulic Schematic (Propel System) - Steel Track Machine
587R Pipelayer Machine Systems Boom Winch, Hook Winch and Winch Frame - Remove
587R Pipelayer Machine Systems Boom Winch, Hook Winch and Winch Frame - Install
The Fitting on the Air Cleaner Group is Installed Incorrectly on Specific Off-Highway Trucks{1051}
CB14 Paving Compactor Machine Systems Piston Pump (Propel) - Disassemble
CB14 Paving Compactor Machine Systems Piston Pump (Propel) - Assemble
Reworking the Pressure Sensor for the Saw Pump{1408, 5057, 6543}
3412E Engine for Caterpillar Built Machines Coolant Flow - Test
587R Pipelayer Machine Systems Boom - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Cooling Fan Control - Test