Improvement to the Governor Control Groups {1265, 1276}
`
2007/11/19
[SEPD0915]
FUEL SYSTEM
CONTROL GP-GOVERNOR
2007/11/19
Improvement to the Governor Control Groups {1265, 1276}
- Multi Terrain Loader:
- 277C (S/N: JWF1-UP)
- Skid Steer Loader:
- 246C (S/N: JAY1-UP)
- 287C (S/N: MAS1-UP)
- 297C (S/N: GCP1-UP)
- 256C (S/N: DWS1-UP)
- 262C (S/N: MST1-UP)
- 272C (S/N: RED1-UP)
Description of Change: An improvement has been made to the governor control groups for the listed machines. A new linkage has been added in order to ensure full range of functionality from the low idle setting to the high idle setting.
Show/hide table
 | |
| Illustration 1 | g01395821 |
The new linkage | |
Adaptable To: The 258-4040 Governor Control Gp and the 280-6340 Governor Control Gp have been changed in order to include the following new parts.
- 258-4243 Link
- 258-4244 Spring Clip
- 258-4242 Clevis Pin
Show/hide table
 | |
| Illustration 2 | g01393668 |
(1) 258-4243 Link (2) 258-4244 Spring Clip (3) 258-4242 Clevis Pin | |
This change was effective with 246C (S/N: JAY254), 256C (S/N: DWS271), 262C (S/N: MST266), 272C (S/N: RED282), 277C (S/N: JWF950), 287C (S/N: MAS825), and 297C (S/N: GCP272).
This change is adaptable to all earlier machines. These parts are available through the AVSpare parts system. See the information on service parts that follows.
Service Parts
Show/hide table
| 258-4040 Governor Control Gp (1) | ||
|---|---|---|
| Quantity | Part Number | Description |
| 2 | 3E-8020 | Screw |
| 2 | 3S-2093 | Cable Strap |
| 1 | 4P-7581 | Clip |
| 2 | 5P-4116 | Hard Washer |
| 1 | 8T-3984 | Knob |
| 3 | 8T-4138 | Bolt |
| 3 | 8T-4205 | Hard Washer |
| 2 | 9X-2038 | Washer |
| 1 | 134-3987 | Clip |
| 3 | 195-0936 | Threaded Insert |
| 4 | 237-7296 | Flat Head Screw |
| 1 | 258-3727 | Screw |
| 1 | 258-4041 | Bracket As |
| 1 | 258-4042 | Governor Pedal Gp (2) |
| 1 | 258-4045 | Governor Lever Gp |
| 1 | 258-4048 | Stop Bracket |
| 1 | 258-4242 | Clevis Pin |
| 1 | 258-4243 | Link |
| 1 | 258-4244 | Spring Clip |
| 1 | 258-4372 | Clip |
Show/hide table
| ( 1 ) | This part number is not serviceable at the group level. Order separate parts. |
| ( 2 ) | Nonserviceable Item |
Show/hide table
| 280-6340 Governor Control Gp (1) | ||
|---|---|---|
| Quantity | Part Number | Description |
| 2 | 3E-8020 | Screw |
| 2 | 3S-2093 | Cable Strap |
| 1 | 4P-7581 | Clip |
| 2 | 5P-4116 | Hard Washer |
| 1 | 8T-3984 | Knob |
| 3 | 8T-4138 | Bolt |
| 3 | 8T-4205 | Hard Washer |
| 2 | 9X-2038 | Washer |
| 1 | 134-3987 | Clip |
| 3 | 195-0936 | Threaded Insert |
| 4 | 237-7296 | Flat Head Screw |
| 1 | 258-3727 | Screw |
| 1 | 258-4041 | Bracket As |
| 1 | 258-4045 | Governor Lever Gp |
| 1 | 258-4048 | Stop Bracket |
| 1 | 258-4242 | Clevis Pin |
| 1 | 258-4243 | Link |
| 1 | 258-4244 | Spring Clip |
| 1 | 258-4372 | Clip |
| 1 | 280-6342 | Governor Pedal Gp (2) |
Show/hide table
| ( 1 ) | This part number is not serviceable at the group level. Order separate parts. |
| ( 2 ) | Nonserviceable Item |
Show/hide table
| 258-4042 Governor Pedal Gp (1) | ||
|---|---|---|
| Quantity | Part Number | Description |
| 1 | 258-4043 | Governor Pedal Gp |
| 1 | 258-4044 | Cable As |
| 1 | 258-4373 | Cable As |
Show/hide table
| ( 1 ) | This part number is not serviceable. Order separate parts. |
Show/hide table
| 280-6342 Governor Pedal Gp (1) | ||
|---|---|---|
| Quantity | Part Number | Description |
| 1 | 258-4043 | Governor Pedal Gp |
| 1 | 258-4373 | Cable As |
| 1 | 280-6344 | Cable As |
Show/hide table
| ( 1 ) | This part number is not serviceable. Order separate parts. |
Information System:
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders
Ether Starting Aid - Test
120K Motor Grader
Specifications
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors
Additional Messages
R1600G Load Haul Dump 3176C Engine Supplement
System Pressure - Release
R1600G Load Haul Dump Hydraulic System
System Pressure - Release
R1600G Load Haul Dump Power Train Electronic Control System
Switches
R1600G Load Haul Dump Power Train Electronic Control System
Electronic Control Module (Power Train)
R1600G Load Haul Dump Power Train Electronic Control System
Autoshift Control
R1600G Load Haul Dump Power Train Electronic Control System
Power Train Electronic Control System
R1600G Load Haul Dump Braking System
System Pressure - Release
R1600G Load Haul Dump Steering System
Steering System Pressure - Test and Adjust
R1600G Load Haul Dump Steering System
System Pressure - Release
120K Motor Grader
Lifting and Tying Down the Machine
2008/02/11
An Improved Exhaust Piping Is Now Used on Track Skidders {1061, 1062}
2007/07/23
Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
120K Motor Grader
Tire Shipping Pressure
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Relief Valve (Line)
120K Motor Grader
Capacities (Refill)
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
587R Pipelayer Machine Systems
Pilot Control Valve - Remove - Load, Boom, and Counterweight
587R Pipelayer Machine Systems
Pilot Control Valve - Install - Load, Boom and Counterweight
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Ride Control Valve (2-Function, 3-Function Control Valve)
R1600G Load Haul Dump Power Train
Torque Converter and Updrive
R1600G Load Haul Dump Machine Electrical System
Circuit Breaker