An Improved Exhaust Piping Is Now Used on Track Skidders {1061, 1062}
`
2008/02/11
[SEPD0927]
AIR INLET AND EXHAUST SYSTEM
EXHAUST GP
- Track-Type Skidder:
- 527 (S/N: 3DS1-UP; 4NS1-UP; BDW1-UP; 2RS1-UP)
- 517 (S/N: 5WW1-UP; 6PW1-UP)
Description of Change: The piping on the track skidders has been improved. A new flexible pipe has replaced the old pipe to the muffler. This allows the pipe on the muffler to have an extended life.
Adaptable To: The new flexible pipe is adaptable to the serial numbers that are listed in Table 1. The new flexible pipe is effective with the serial numbers that are listed in Table 2.
Show/hide table
Sales Model     | Serial Number     |
517     | S/N:5WW1-443     |
517     | S/N:6PW1-402     |
527     | S/N:4NS1-632     |
527     | S/N:2RS1-301     |
527     | S/N:3DS1-559     |
527     | S/N:BDW1-621     |
Show/hide table
Sales Model     | Serial Number     |
517     | S/N:5WW444-UP     |
517     | S/N:6PW403-UP     |
527     | S/N:4NS633-UP     |
527     | S/N:2RS302-UP     |
527     | S/N:3DS560-UP     |
527     | S/N:BDW622-UP     |
Show/hide table
Qty.     | Sales Model     | Serial Number     | Part Number     | Part Name     |
1 1 2 1     |
517     | S/N:5WW S/N:6PW     |
247-5007 247-5010 247-5011 299-7358     |
Pipe Pipe Clamp Pipe     |
1 1 2 1     |
527     | S/N:3DS S/N:BDW     |
247-5007 247-5010 247-5011 299-7552     |
Pipe Pipe Clamp Pipe     |
1 1 1 2     |
527     | S/N:4NS S/N:2RS     |
247-5006 247-5007 247-5010 247-5011     |
Pipe Pipe Pipe Clamp     |
- Remove the old pipe (1) .
Show/hide table
![]() | |
Illustration 1 | g01394008 |
- Place clamps (5) onto pipe (3). The torque for clamps (5) is 48 ± 5 N·m (35 ± 4 lb ft). Place new pipes (2), (3), and (4) onto the muffler. Refer to Table 3 for the correct part numbers.
Show/hide table
![]() | |
Illustration 2 | g01393981 |
Information System:
120K Motor Grader
Lifting and Tying Down the Machine
2007/11/19
Improvement to the Governor Control Groups {1265, 1276}
3408E and 3412E Engines for the 844 Wheel Dozer and for 988F Series II and 990 Series II Wheel Loaders
Ether Starting Aid - Test
120K Motor Grader
Specifications
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors
Additional Messages
R1600G Load Haul Dump 3176C Engine Supplement
System Pressure - Release
R1600G Load Haul Dump Hydraulic System
System Pressure - Release
R1600G Load Haul Dump Power Train Electronic Control System
Switches
R1600G Load Haul Dump Power Train Electronic Control System
Electronic Control Module (Power Train)
R1600G Load Haul Dump Power Train Electronic Control System
Autoshift Control
R1600G Load Haul Dump Power Train Electronic Control System
Power Train Electronic Control System
R1600G Load Haul Dump Braking System
System Pressure - Release
2007/07/23
Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
120K Motor Grader
Tire Shipping Pressure
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Relief Valve (Line)
120K Motor Grader
Capacities (Refill)
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
587R Pipelayer Machine Systems
Pilot Control Valve - Remove - Load, Boom, and Counterweight
587R Pipelayer Machine Systems
Pilot Control Valve - Install - Load, Boom and Counterweight
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System
Ride Control Valve (2-Function, 3-Function Control Valve)
R1600G Load Haul Dump Power Train
Torque Converter and Updrive
R1600G Load Haul Dump Machine Electrical System
Circuit Breaker
R1600G Load Haul Dump Steering System
Articulated Hitch
R1600G Load Haul Dump Power Train
Output Transfer Gears - Adjust