Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3256, 3258}
`
2002/08/12
[SEPD0642]
POWER TRAIN
DIFFERENTIAL & BEVEL GEAR GP
2001/06/04
A Correction to the Setting Tool for the Bearing for the Differential Pinion and to the Setting Procedure {3256, 3258, 3281}
2002/08/12
Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3256, 3258}
- Off-Highway Truck:
- 789C (S/N: 2BW1-UP)
The chart for the required tools is incorrect. Replace the chart with the following chart.
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 6V-6106 | Dial Indicator | 2 |
| B | 3S-3269 | Indicator Contact Point | 2 |
| C | 122-0449 | Rod Sleeve Extension | 2 |
| D | 1P-0520 | Driver Group | 1 |
| E | 5P-5421 | Bolt | 4 |
| F | 1U-7552 | Hydraulic Ram | 1 |
| G | 1U-5230 | Hand Hydraulic Pump | 1 |
| H | 143-6092 | Pressure Differential Meter | 1 |
| J | 6V-3966 | Valved Nipple Assembly | 1 |
| K | 6V-4143 | Coupler Assembly | 1 |
| L | 2D-7325 | Pipe Tee | 1 |
| M | 4B-4280 | Washer | 4 |
| N | 5P-1730 | Holding Fixture | 1 |
| P | FT-2392 | Adjusting Nut | 1 |
| Q | FT-2393 | Adjusting Nut | 1 |
| R | 1U-5716 | Differential Pinion Bearing Assembly Tool | 1 |
| S | 1P-2376 | Connecting Coupler | 2 |
| T | 8F-0024 | Hose Assembly | 1 |
| U | FT-2546 | Bearing Preload Tool | 1 |
| V | 8T-5096 | Dial Indicator Group | 1 |
| W | Hydraulic Press | 1 | |
| X | 1P-2375 | Connecting Coupler | 2 |
| Y | 1S-8937 | Needle Valve | 1 |
Information System:
PS-360B Paving Compactor
Fuses - Replace
3508B Engine for D11R Track-Type Tractors
Engine Cooling Fan Bypass Solenoid
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System
MID 028 - CID 0263 - FMI 01
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Heater Coil - Remove and Install
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Evaporator Coil - Remove and Install
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Instrument Panel (Side) - Install
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System
MID 028 - CID 0263 - FMI 00
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Instrument Panel (Side) - Remove
226 and 242 Skid Steer Loaders Power Train
Piston Motor (Hydrostatic) - Remove
226 and 242 Skid Steer Loaders Power Train
Piston Pump (Hydrostatic) - Install
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems
Position Sensor (Front Steering) - Remove and Install
3512 and 3516 EUI Engines for Caterpillar Built Machines
Air Inlet and Exhaust System Operation
D350E Series II and D400E Series II Articulated Trucks Power Train
Relief Valve (Torque Converter Outlet)
226 and 242 Skid Steer Loaders Power Train
Piston Motor (Hydrostatic) - Install
938G Wheel Loader, 938G Series II <BR>Wheel Loader, IT38G <BR>Integrated Toolcarrier and IT38G Series II <BR>Integrated Toolcarrier Traction Control System
MID 028 - CID 0296 - FMI 09
R1600G Load Haul Dump Hydraulic System
Lift and Tilt Cylinder Drift - Check
R1600G Load Haul Dump Hydraulic System
Lift and Tilt Cylinder Speed - Check
2002/11/25
A New Alternator Guard is Used {1405}
3524B Engine for Caterpillar Built Machines
Coupling Pump - Install
3524B Engine for Caterpillar Built Machines
Fuel Transfer Pump - Remove
D350E Series II and D400E Series II Articulated Trucks Power Train
Lockup Clutch and Solenoid Valve
R2900 Load Haul Dump
Safety Signs and Labels
797 Off-Highway Truck Engine Supplement
Fuel Transfer Pump - Install
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}